Arduino is an awesome platform for learning how an embedded system works. Arduino could integrate with different sensors that means you could use a number of sensors and develop a project with them. In this post, we are going to describe Bluetooth Module (HC-05) and Arduino Uno. How it works and develop a project like voice control appliances.Where you could turn ON and OFF your appliances through your voice commands. Pin Diagram of HC-05 Bluetooth Module Step 1: Setup Arduino IDE This is the first step if you have not set up Arduino IDE then install and setup. Follow the link to set up. Step 2: Code String voice; ledPin = ,       
fanPin = ,
tvPin = ; {
     digitalWrite(ledPin, HIGH); 
     digitalWrite(fanPin, HIGH); 
     digitalWrite(tvPin, HIGH);
     } {
     digitalWrite(ledPin, LOW); 
     digitalWrite(fanPin, LOW);
     digitalWrite(tvPin, LOW); 
     
} {
  Serial.begin( );
  pinMode(ledPin, OUTPUT); 
  pinMode(fanPin, OUTPUT); 
  pinMode(tvPin, OUTPUT);
 
} { (Serial.available()){  
  delay( ); c = Serial.read(); (c == ) { ;} 
  voice += c; 
  } (voice.length() > ) {
    Serial.println(voice); (voice == )
  {
    allon();
  } (voice == )
    {
      alloff();
    } (voice == ) 
    {
      digitalWrite(fanPin, HIGH);
    } (voice == )
    {
      digitalWrite(ledPin, HIGH);
    } (voice == )
  {
    digitalWrite(tvPin, HIGH);
  } (voice == )
    {
      digitalWrite(ledPin, HIGH); 
      digitalWrite(fanPin, HIGH);
      digitalWrite(tvPin, HIGH);} (voice == )
    {
      digitalWrite(fanPin, LOW);
    } (voice == )
    {
      digitalWrite(ledPin, LOW);
    } (voice == )
  {
    digitalWrite(tvPin, LOW);
  } (voice == )
    {
      digitalWrite(ledPin, LOW);
      digitalWrite(fanPin, LOW);
      digitalWrite(tvPin, LOW);
    }
  
voice= ;}} //String type variable declared int 2 3 4 /* Turn ON all appliances*/ void allon () /* Turn OFF all appliances*/ void alloff () void setup () 9600 void loop () while 10 char if '#' break if 0 if "*everything on" else if "*everything off" /* Turn ON using particular command*/ else if "*fan on" else if "*light on" else if "*tv on" else if "*all on" /* Turn off using particular command */ else if "*fan off" else if "*light off" else if "*tv off" else if "*all off" "" Setup 3: Wiring Let’s hands dirty with some jumper wire. To develop this project you should need some components which are: Arduino Uno Bluetooth Module (HC-05) Mobile Phone(App installed AMR_VOICE) LEDs Jumper Wire Breadboard Conclusion This project is based on voice control, using commands you could control your appliances but with this device, you can do more than that so keep in touch with me.

JUMPER

Read My Stories

Too Long; Didn't Read

Developers: Build Less. Deliver More. [Learn how]	

Make Arduino Voice-Controlled Appliances with HC-05 Bluetooth Module

Too Long; Didn't Read

Company Mentioned

Dorje

About Author

TOPICS

THIS ARTICLE WAS FEATURED IN...

Make Arduino Voice-Controlled Appliances with HC-05 Bluetooth Module

Too Long; Didn't Read

Company Mentioned

Dorje

About Author

TOPICS

THIS ARTICLE WAS FEATURED IN...

RELATED STORIES