If you are a founder or manager, one of the highest-leverage activities you can conduct is hiring. And in our competitive market, it’s just not something you can afford to screw up. A common model for recruiting processes is the . From a company’s perspective, if you look at how candidates progress through the recruiting process, things resemble a funnel. At the (wide) top of the funnel are candidates that have just applied or that you have reached out to. At the (narrow) bottom of the funnel are the candidates you hire. The funnel gets narrower because in between the different stages, candidates can exit the funnel — either because they aren’t interested in moving forward in your process, or because you don’t think they are a good fit. recruiting funnel Much has been written about recruiting funnel design: how to move candidates forward, how to measure your progress, etc. It’s a great model. But the funnel model is . I’d like to propose a model that looks at things from the candidate’s perspective. I call this the company-centric Candidate Climb. The Candidate Climb At a high-level, the Candidate Climb is similar to the funnel in that it looks at the different stages a candidate goes through with a company to ultimately assess fit. The main difference is that rather than look at the volume of candidates in each stage, the Candidate Climb looks at the (by the company or by the candidate). time and effort expended A typical climb might look like: Candidate applies to a job role (low effort). Often, resumes are screened in a few minutes ( !) Company screens resume (low effort): or seconds A 30–60-minute phone call between the candidate and someone at the company. Initial chat (medium effort): : The candidate conducts an hour-long technical interview over the phone. Technical phone screen (medium effort) The candidate goes onsite for a day of interviews at the company. Onsite interview (high effort): After that, there might still be a few steps: the company might run some reference checks, collect feedback, make a decision, and then extend and negotiate an offer. But if you look at the main stages and the effort required, it looks like a “climb”. A good climb The characteristics of a good climb are: The candidate and the company expend less effort earlier in the process and only increase their effort as they gain confidence that there might be a fit. Increasing effort (“gradation”): The increase in effort is balanced between the company and the candidate. Neither is asked to unilaterally undertake any large investment. Balanced effort: I realize that this sounds a little general, so I’ll illustrate with some common anti-patterns I’ve seen that companies should avoid. The “Hoop Jump” You ask candidates to “jump through a hoop” at the beginning of the process, requiring them to undertake a task of significant effort (e.g. a project) before your company invests any time at all. What it is: It’s imbalanced. There are a few bad things that might happen. First, the most qualified candidates may just opt-out of your process early on. They’ve probably got other options, so why should they invest time before you do? Second, it’s a pretty bad candidate experience if you have them jump through the hoop, then reject them for an obvious reason that could have been identified much earlier. Why it’s bad: Some companies with a high volume of candidates might be tempted to use this technique, but again, even as a desirable employer, the early hoop jump might cause you to lose the most desirable candidates. In some cases with high volume, you may have candidates that are hard to evaluate — based on their application only, you may have rejected them, but you’d like to give them a chance to demonstrate their skills. In that case, a concrete task early on in the process could be a good idea. When it’s OK: Some companies claim that the hoop filters out candidates that don’t have “commitment”. That can be true later on in the process when you’ve shown commitment as well. But if you ask for commitment early on, you’ll probably only get desperation instead. The “That Escalated Quickly” Also known as the middle finger You move to a step that requires a lot of effort very early on in the process. For instance, maybe you bring a candidate onsite without doing any screening beforehand. What it is: It’s wasteful of your time and of the candidate’s time. Maybe there’s an obvious reason the candidate and the company aren’t a good fit, but you’ve made a large commitment before either side conducts basic checks. Why it’s bad: Sometimes, you have information with a high degree of confidence that could make other stages redundant. For instance, maybe you’ve worked with that candidate previously or had interviewed them in the past. Or sometimes, candidates might be on a tight timeline, and it might be worth the risk of skipping some stages. When it’s OK: The “Encore” You surprise the candidate at the end of the process with a new, unanticipated step — like another day of onsite interviews. What it is: Imagine getting to the finish line at a marathon, only to be told that the finish line is still a mile further. Why it’s bad: actual Occasionally, you might realize that at the end of your process, you’re still missing some crucial information about the candidate (or maybe there are bits of information that are contradictory). If it only happens occasionally, it’s not the end of the world. But if there’s a pattern of this happening, your process is probably not well-designed, and you need to figure out how to better capture the signals you need to make a decision before the end of the process. When it’s OK: The Wide Steps The candidate has to wait for a long period of time between two steps in your process. You’re slow to communicate or schedule next steps. What it is: In general, the slower your process, the more likely you are to lose candidates. They might lose interest, or they might get swiped up by another company. Why it’s bad: It rarely ever is. As long as you’re not rushing things, not being sloppy, and not pressuring candidates, you should move as fast as you can. When it’s OK: The Candidate Climb is just one way to model your process to avoid a subset of common “missteps”, so this isn’t meant to be exhaustive. There are many different mistakes you can make in your hiring process, so more generally, focus on what your process looks like from the candidate’s experience.