The project will provide a new access drive to the Culver's and the Lowe's home improvement store on Jackson Road.

What’s that? Developers pitch project for empty lot near Ann Arbor-area Lowe’s

In order to take advance of all the show has to offer, The Auto Care Association, co-organizer of the show with MEMA, released a full list of events and places at the show in which you can learn ...

Full List: Auto Care Association Events at AAPEX

You'll need jumper cables, a flashlight and you may want to wear gloves and coveralls. Here's how to jump start your car safely to get running.

How to jump start a car: How to use jumper cables to get your vehicle up and running

Long-term care insurance is a policy that covers assistance seniors may need for basic everyday activities like bathing and eating. It can also cover more comprehensive services like ...

3 types of long-term care insurance seniors should know

Skin Care: No other ingredient in food has received as much adverse coverage as ghee. Research throughout the years has revealed that ghee is beneficial for you rather than harmful to the body.

Skin Care: Complete Guide on Ghee's Skin Benefits!

The half-hour setup flew by as we prepared to dive into the world of all things auto care. 🍔 Lunch Pit Stop: Amidst the day's activities, we enjoyed a delightful lunch in the activity room.

🚗💨 Lee Myles Auto Care & Transmissions Goes Back to School! 📚

In fact, according to the Cost of Care Survey from Genworth, you could pay anywhere from $1,700 to upwards of $9,000 for it — and that's per month. Fortunately, long-term care insurance can help ...

How much long-term care insurance do I need? What the experts say

Auto-GPT is a revolutionary open-source AI tool that harnesses the power of GPT-3.5 and GPT-4 models to generate human-like text and perform various tasks autonomously. By automating tasks with Auto-GPT, you can save time, increase productivity, and ...

How to Run Auto-GPT in 6 Easy Steps: A Complete Guide [2023]

Not everyone survived the lapse of care that health care providers and patients were forced into in July 2021 under new rules in the 2019 reform to Michigan no-fault auto insurance, state Sen. Mary Cavanagh (D-Redford Twp.) told lawmakers Wednesday in the ...

Health care providers, advocates plead for fix to ‘broken’ rules in no-fault auto insurance reform

Get the most recent info and news about Firestone Complete Auto Care on HackerNoon, where 10k+ technologists publish stories for 4M+ monthly readers.

Firestone Complete Auto Care is different. We are positively involved in your world — offering not only the best customer service, quality products and the right solutions for your auto care needs, but also initiatives that improve your community and the environment.

Firestone Complete Auto Care

The easiest way (by far!) to build a real React + Firebase web app

373 Stories To Learn About Learning To Code

245 Stories To Learn About Android

261 Stories To Learn About Software Development

In this tutorial, we will be building a simple yet smart web application, to demonstrate how to authenticate users on a typical website or web application via face recognition instead of the traditional login/password pair. In this process, we are going to rely on as the facial recognition library, as the , and as the CSS framework. FaceIO React.js JavaScript framework TailwindCss The final version of this project looks like this. Without further ado, let's get started. Overview Please bear in-mind is that while this tutorial is focused on integrating FaceIO with React, the fio.js, facial recognition library can be integrated with any modern JavaScript framework out here including but not limited to or even Vanilla JavaScript. The reader is invited to take a look at the FaceIO or documentation for a step-by-step integration guide. React, Vue, Angular, Next integration guide getting started Creating a Rect.js project with tailwind CSS We are using vite to create the ReactJs project in this tutorial. Open your terminal and run the following command to scaffold your React project using vite. npm create vite@latest my-project — — template react Now follow the terminal prompt to scaffold your project. After you completed this step, open this project in your favorite code editor. The project structure should look like this. ├── package.json
├── package-lock.json
├── public
│ └── vite.svg
├── src
│ ├── App.css
│ ├── App.jsx
│ ├── assets
│ │ └── react.svg
│ └── main.jsx
└── vite.config.js ├── index.html Now, to install tailwind CSS in your vite project, follow these steps carefully. npm install -D tailwindcss postcss autoprefixer Now open your file and add your project source path. tailwind.config.js ], }, } /** @type {import('tailwindcss').Config} */ module .exports = { content : [ "./index.html" , "./src/**/*.{js,ts,jsx,tsx}" , theme : { extend : {}, plugins : [], Now you have successfully installed tailwind CSS in your React and vite project. . Let’s focus on how to integrate face authentication in our project in the next section all powered by FaceIO Adding FaceIO to Your React application The great thing about the fio.js is its . This library comes with only two major methods that are: enroll() and authenticate(). facial recognition library straightforward usage enroll() is for ( ) new users, while authenticate()  is for previously enrolled users. Before discussing these methods, let’s link the fio.js library to our react application first. For that, just open the index.html file in your project and link to your project. enrolling registering recognizing FaceIO CDN </body> <body> < script src = "https://cdn.faceio.net/fio.js" > </ script > < div id = "root" > </ div > < script type = "module" src = "/src/main.jsx" > </ script > After successfully linking the FaceIO CDN, open App.jsx file and delete all the boilerplate code inside App component. To initiate our FaceIO library, we add an useEffect react hook. The code inside this hook runs only once when the component is initiated. }, []);
} import "./App.css" ; import { useEffect } from "react" ; function App ( ) { let faceio; useEffect( () => { faceio = new faceIO( "your-app-id" ); // Get yours from https://console.faceio.net You can see we are using an ID as an argument while instantiating the faceIO object. When you signup for a faceIO account, you can access these IDs inside the faceIO console. All the setup is now completed and let’s focus on authenticating the user using FaceIO. Enroll (Register) New User via Face Recognition provides a very simple interface to register new users. We use function to register a new user. As FaceIO needs your webcam permission, do accept the permission dialogue when prompted. FaceIO enroll The enroll function has 2 aliases. You can use register and record functions as drop-in replacements for enroll. When you run this function in your browser, it launches the faceIO widget. At first, it takes user consent to scan their face, then prompt to accept the webcam permission. If all requirements are satisfied, the faceIO widget opens your camera and scans your face. It converts your face data into an array of floating point numbers. After collecting the facial data, faceIO is prompted to enter a PIN code. This PIN code is used to distinguish  users with extremely similar faces. You think of this as a two-factor auth when something goes south. Let’s add faceIO enroll in our react application. We keep the app very simple. Therefore, let’s create a button called when someone clicks on that button, we run the function to enroll a new user. register enroll After adding the register button and the javascript handler on the button click, App.jsx file looks like this. }, []); },
      }); }
  }; );
} import "./App.css" ; import { useEffect } from "react" ; function App ( ) { let faceio; useEffect( () => { faceio = new faceIO( "fioa414d" ); const handleRegister = async () => { try { let response = await faceio.enroll({ locale : "auto" , payload : { email : "example@gmail.com" , console .log( ` Unique Facial ID: ${response.facialId} Enrollment Date: ${response.timestamp} Gender: ${response.details.gender} Age Approximation: ${response.details.age} ` ); } catch (error) { console .log(error); return ( < section className = "w-full h-screen flex flex-col items-center justify-center" > < h1 className = "font-sans font-bold text-xl mb-4" > Face Authentication by FaceIO </ h1 > < div className = "flex flex-col justify-center items-center" > < button className = "block px-4 py-2 outline-none bg-blue-500 rounded text-white mb-2" onClick = {handleRegister} > register </ button > </ div > </ section > export default App; In the above code, you can see I wrap the code inside a try-catch block. If something goes wrong, FaceIO throws some errors. The error messages are very helpful and you can get a complete list of error codes in the official documentation. The enroll function accepts only an optional parameter object. These optional parameters accept properties to configure the user registration process. In the above example, I define locale and payload properties inside the optional parameter of the enrolling function. the locale property represents the default interaction language of your user. In our case, we provide auto to automatically detect the language. Inside the payload, you can add any JSON serializable value unique to your user. In this example, we are adding the email of the user as a payload. Whenever use log-in in the future, we can access the email payload from the FaceIO return object. Enroll function in FaceIO returns a promise. Therefore in the example, I am using the async/await feature of javascript. If you don’t prefer async/await, you can use .then instead. When the promise completes, it results in an object. By using the object, we can access the unique facial ID of the user. In addition to this, the userInfo object also provides a property from which, we can get the probable age and gender of the user. userInfo details Authenticate a Previously Enrolled User After registering the user successfully, this is the time to authenticate registered users. For this purpose, Pixlab provides the authenticate function. This authenticate function also has 3 aliases, auth, recognize and identify. The authentication function needs only a single frame for the user to recognize. Therefore, it is very bandwidth friendly. After successful authentication, it returns a userData object. This userData contains the payload you have specifies in the registration and the face of the user. Inside our App.jsx file, we make another button called . When a user clicks on this button, it invokes the handleLogIn helper function. This function is ultimately responsible to invoke the “authenticate” function. Let’s see all of these in code: Log-in }, []); },
      }); }
  }; );
} import "./App.css" ; import { useEffect } from "react" ; function App ( ) { let faceio; useEffect( () => { faceio = new faceIO( "fioa414d" ); const handleRegister = async () => { try { let response = await faceio.enroll({ locale : "auto" , payload : { email : "example@gmail.com" , console .log( ` Unique Facial ID: ${response.facialId} Enrollment Date: ${response.timestamp} Gender: ${response.details.gender} Age Approximation: ${response.details.age} ` ); } catch (error) { console .log(error); return ( < section className = "w-full h-screen flex flex-col items-center justify-center" > < h1 className = "font-sans font-bold text-xl mb-4" > Face Authentication by FaceIO </ h1 > < div className = "flex flex-col justify-center items-center" > < button className = "block px-4 py-2 outline-none bg-blue-500 rounded text-white mb-2" onClick = {handleRegister} > register </ button > </ div > </ section > REST API While creating your account in FaceIO, you will be assigned an API key. You can find this API key in the faceIO console. By using this API key, you can interact with the FaceIO back-end with . The base URL of the REST API is `https://api.faceio.net/`. RESTful API Currently, the FaceIO REST API supports . Deleting the face of a user, setting the additional payload to a Facial ID, and setting the Pin code for a Facial ID. Do remember to use those API endpoints from a secured environment or from your backend server. Don’t run those APIs from the client side. 4 API Endpoints Deleting a Facial ID To delete a given , we have to make a get request to endpoint. This endpoint has two request parameters. One is the that accepts the API key, another is the which accepts the facial ID which you want to delete. Facial ID https://api.faceio.net/deletefacialid key fid curl — request GET \— url 'https://api.faceio.net/deletefacialid?key=APIkey&fid=FaceID' As a response, FaceIO returns a status code and a `payload` boolean that tells if the data along with the payload is successfully deleted or not. FaceIO Webhooks Webhooks are used as a communication method between servers. FaceIO provides a rich webhook experience that you can use to update your back-end server.  FaceIO sends a on 3 events. enroll when a new user enrolls in your system, auth when an already registered user is authenticated using faceIO, and deletion when a faceID is deleted using the REST API we have discussed above. webhook Each webhook request is a POST request from the faceIO server and a JSON object. The request body looks like this: }
} { "eventName" : "String - Event Name" , "facialId" : "String - Unique Facial ID of the Target User" , "appId" : "String - Application Public ID" , "clientIp" : "String - Public IP Address" , "details" : { "timestamp" : "Optional String - Event Timestamp" , "gender" : "Optional String - Gender of the Enrolled User" , "age" : "Optional String - Age of the Enrolled User" Name of the each field is self-explanatory about what value it contains. Follow these steps to configure the webhook with the FaceIO server. 1. Connect to your account via the first.On the console main view, visit the Application Manager. FACEIO Console 2. Select the target application for which you want to set up webhooks. 3. Once the target application is selected. Enter your Webhook Endpoint URL for receiving events and save your modification. 4. You’re all set. Upon an event is triggered, FACEIO shall make an HTTP POST request to the URL you have configured. Conclusion This is an in-depth guide on adding facial authentication to your React application. If you like this guide and want to know more about faceIO, please visit the official . You can also checkout their if you have any questions. documentation page FAQ page Also published here .

Authenticate Users Via Face Recognition On Your Website or App

Fetching Places From Google Maps with Flutter

A Non-Comparable WhatsApp Clone made using react-native (Expo) and Firebase In the , we installed all the packages that we needed and also checked the firebase structure in case you don't have any doubt. Now, let’s start with the real work and start 👨‍💻👨‍💻 previous part (Part 1) First, let’s just see the application's file structure, and then we can start with the navigation and rest all with the help of videos. File Structure This will be the final file structure of our application and you might have some doubts with some files and but these will become clearer once we start building. The file in the navigation and the in the Screens folder, especially will be used later to implement the Auto-Login/Logout features. The rest of the files are clear, I suppose, but these will become soon if any doubt. If any doubt related to code, Check the NavContainer.js StartUpScreen.js Github Link Note: Check The Github Link for this project. The code in Github is till this of this project only. I will upload the entire project code after Part-3. Adding Fonts First, before getting any further let’s add fonts to our application. Then we can move ahead by adding navigation to our application. If you have any doubt, please have a look at of this project where I explained all these things in detail Part1(Module Installation) Download Fonts https://drive.google.com/drive/folders/1wADl1_QIpVzQ72JNKkrdVm0yJUpLjCtW Video https://youtu.be/vSzVDJeu8Mo Adding Navigation With that, we are ready to add navigation to our application. So, create a header and Toptabnaviagator just as in WhatsApp. Video https://youtu.be/G-wBmeIstzM If you have any doubts about AppLoading or HeaderButtons you can check my where I explained all these things in detail. Youtube-Clone-React-Native-Part1 Working on Authentication Now, let’s move on to the Authentication Work and for that, we will also need to Add redux. So, now let’s add both + we also need to add firebase. So, this is going to be long. Let’s get Started Moving To the Auth Screen (Switch Navigator) Before, getting started let’s just add a to our application. What is a ? Switch navigator SwitchNavigator SwitchNavigator is mostly used when adding the Authentication functionality to our application. Basically, it resets routes to their default state depriving us of the back functionality. And that’s what we want. If the user is not sighed In we want the user to navigate to the Auth screen without giving the user the facility to go back to the main screen. So, let’s modify our screen a little bit and below is the code for the whole file: WhatsAppNavigator.js import React from "react";
import { Platform } from "react-native";
import { createStackNavigator } from "react-navigation-stack";
import { createMaterialTopTabNavigator } from "react-navigation-tabs";
import { createAppContainer, createSwitchNavigator } from "react-navigation";
import { HeaderButtons, Item } from "react-navigation-header-buttons";
import { Ionicons } from "@expo/vector-icons";
import { MaterialIcons } from "@expo/vector-icons";

import HeaderButton from "../components/HeaderButton"; // Our HeaderButton Component
import Chat from "../screens/WhatsApp/Chat";  //-------------------- |
import Message from "../screens/WhatsApp/Message"; //                |
import Status from "../screens/WhatsApp/Status"; //                  |
import Calls from "../screens/WhatsApp/Calls"; //                    |
import Camera from "../screens/WhatsApp/Camera"; //                  Our all Screens
import Auth from "../screens/User/Auth"; //                          |
import AddDetails from "../screens/User/AddDetails"; //              |
import StartUpScreen from "../screens/StartUpScreen"; //             |
import Colors from "../constants/Colors"; //                         |
import Profile from "../screens/User/ProfileScreen"; // -------------|

const WhatsAppTopTabNav = createMaterialTopTabNavigator( // Our TopNavigator
  {
    Camera: {
      screen: Camera,
      navigationOptions: {
        tabBarVisible: false, // TabBar Shouldn't be visible here
        tabBarLabel: (TabBarInfo) => { // Adding Image as a Camera Label....You can also use 'TabBarIcon'
          return (
            <Ionicons
              name={Platform.OS === "android" ? "md-camera" : "ios-camera"}
              size={25}
              color="black"
            />
          );
        },
      },
    },
    Chats: Chat,
    Status: Status,
    Calls: Calls,
  },
  {
    initialRouteName: "Chats", // Initial tab should be the Chats Tab
    tabBarOptions: {
      labelStyle: {
        fontSize: 12,
        fontFamily: "open-sans-bold",
      },
      indicatorStyle: {
        backgroundColor: "white",
      },
      activeTintColor: "white",
      inactiveTintColor: "#D3D3D3",
      pressColor: "white",
      style: {
        backgroundColor: Colors.accent,
      },
    },
  }
);

const WhatsAppNavigator = createStackNavigator({
  MainNav: {
    screen: WhatsAppTopTabNav,
    navigationOptions: {
      headerTitle: "WhatsApp",
      headerRight: () => (
        <HeaderButtons HeaderButtonComponent={HeaderButton}>
          <Item
            IconComponent={Ionicons}
            title="Cart"
            iconName={Platform.OS === "android" ? "md-search" : "ios-search"}
          ></Item>
          <Item
            IconComponent={MaterialIcons}
            title="Cart"
            iconName="more-vert"
          ></Item>
        </HeaderButtons>
      ),
      headerTitleStyle: {
        color: "white",
      },
      headerStyle: {
        backgroundColor: Colors.accent,
        elevation: 0,
        shadowOpacity: 0,
      },
    },
  },
  Messages: Message,
  Profile: Profile,
});

const AuthNav = createStackNavigator({ //         |
  Auth: Auth, //                                  |
  AddDetails: AddDetails, //                      | 
}); //                                            |
//                                                |
const MainNavigator = createSwitchNavigator({ //  |
  StartUpScreen: StartUpScreen,//                 *What We Changed*
  Auth: AuthNav, //                               |
  WhatsAppMain: WhatsAppNavigator, //             |
}); //                                            |
//                                                |
export default createAppContainer(MainNavigator)//| Creating And Initialising Firebase project First, quickly go to and click on Add Project / Create A project. Give a Project name → Accept the Conditions → Disable/Enable Google Analytics → Create Project Firebase Console Adding RealTime DataBase I will be using the RealTime database for this app but it's your choice to use fireStore database or RealTime database. Open the above page on and click on Create Database. Specify the database location and . https://console.firebase.google.com/u/0/project/{ProjectName}/database start it in Test mode for now With that our firebase should look like this with default Test rules which we will change later: Now simply click on the storage tab and the sidebar and click on Get started. Adding Firebase Storage Now, press ‘Next’ → ‘Done’. We also need to change our security rules because the default rules allow requests only when the user is authenticated but in our case user will use storage when he/she is signing up. ⁂ He/she is !Authenticated. So, change the rules as follows: Now, similarly, click on the Authentication tab in the sidebar and click on , and in the “Sign-in methods” select Email/Password Adding Authentication Get started Click enable and I won't be enabling the “Email link” toggle but it’s completely your choice. Of course code for that would be different then. Adding Redux Again, If you have any doubt about Redux, Redux Thunk, etc have a look at of this project. Part1(Module Installation) Video https://youtu.be/EwKx0MqOPoA Implementing The Entire Authentication Logic Let’s move on to the main Authentication logic where we will take a look at Redux action creators, Redux Thunk, Firebase, and of course also test our designing skills. To keep the videos short I will be pasting the content of my , as well as the which are quite long. Rest we will create on our own in the video. Below are the 3 files which I will paste n the video. authentication Input component screen AddDetails screen Link for the (Sorry for not uploading the file in the drive to not make the article long by code) Auth.js file https://drive.google.com/file/d/1gIy8m0uu81COi-FUzNZnVK4iDtPqPFuv/view?usp=sharing We used the useReducer hook in above file(Which is not at all related to redux and is provided by react). The useReducer function just as a redux-reducer accepts a reducer function, and an initial state and returns the current state. UseReducer is used in a form where we have multiple inputs or when the next state depends on the previous one. You could have also used useState and have each separate state but this method is more optimized because unlike is useState you don't have to use useCallback for every state. Link for the AddDetails.js file(Sorry for uploading the file in the drive to not make the article long by code.) https://drive.google.com/file/d/15yJaQMfyUXyrxjExN0qWDiAAl-h9PyN2/view?usp=sharing Also link, for the Input component : https://drive.google.com/file/d/1p_C60YgtDTKY1gLRAoGwBF0XqbXcqUmb/view?usp=sharing Now, let’s complete our Authentication work with this video: Video https://youtu.be/QS5WauiIaQc Finally, Authentication is nearly finished. Oof! Now we can Login/Signup but we also want “Auto-”. So, let’s work on that first then we can start working on our Home/Chat screen where we can start showing a list of users that are stored in the firebase database. Implementing Auto-Login Soo, Let’s also add an Auto-Login facility in our app so that the user doesn’t have to log in again and again. Basically, we need to store our token somewhere on the device and if it’s there when the App re-launches then we can navigate users to the Chat screen. But we can’t store it in redux as redux is in memory and the data will be lost when the app re-launches. So, we will be using AsyncStorage instead which allows us to persist data offline. Also, the token that we get from firebase has a expiresIn field that tells us when the token will expire, and generally, it will expire after 1 hour. So, we have to add some logic to detect if the token has expired or not and navigate accordingly. Video https://youtu.be/HwKKNXvAPZQ Implementing Auto-Logout We might be chatting in our app and after 1 hour our token will get expired in the middle of our chatting. Then as soon as we do some work related to firebase, we will get errors because our token will be expired right? For that, we need to add some logic that automatically clears our Auth redux store as soon as our token gets expired(with the help of timers). But we also need to navigate back to Auth screen and for that, we need a place that is always rendered. Yes, that is the App.js file . But there we can’t access our redux store as only our navigator is inside our provider. So, we need to wrap our Navigator inside a component where we can check if our Auth redux store is empty or not. And if it’s empty we can navigate to the Authenticate Screen. . Let’s see 👀 it in 👨‍💻👨‍💻 That was a mouthful Video https://youtu.be/cGel9eX9Tjc Creating Our Chat/Home Screen + Adding Logout So, This gonna be something interesting cuz now we will be able to see some output in our app i.e See all the users Signed Up. First, in the video, let’s start up by making our component which we will pass in the UserItem FlatList Video https://youtu.be/xIpD7MpR-qw If you are going by the video, I made some errors which I corrected later in the video. So, make sure you watch the entire video till the very end. But nevertheless, we have completed the following in just 1 article Navigation Authentication Login/Logout Auto-Login/Auto-Logout Showing all the Users stored in our firebase database Wow !! we are just a step away from our complete app! So, now only the messaging part is left which I will take up in the next Part because the article is getting too long now. Till then Stay Safe; Stay Healthy Thank you! This article was first published . here Watch the Youtube introduction here: . https://www.youtube.com/watch?v=eAFEvKIJsNI

How To Build a WhatsApp Clone in React Native: Beginner’s Guide [Part 2]

Flutter has been booming worldwide from the past few years. While there are many popular mobile app development technologies out there, Flutter has managed to leave its mark in the mobile application development world. In this article, we’ve curated the best Flutter app templates available on the market as of July 2020. Flutter can be the framework model for every app out there. This app development framework has taken the world by storm with its simplicity, widgets, and pixel-by-pixel based mobile UI development. Simply, the apps developed using Flutter are beautiful and feature-rich. Why Flutter? Flutter makes the app development simpler by applying a Widgets mechanism. Basically, we can create the application interface by simply stacking the Widget tree with different Widgets. The flow of Widgets across the code determines the flow of UI elements on the mobile screen. It makes use of the Dart programming language at its core. Moreover, the learning curve of Flutter and Dart programming language is not that steep. It easy in comparison with other application development techs. It delivers a cross-platform application development functionality. This means the same coding implementation can be applied to create both Android and iOS-based applications. It offers many libraries out of the box. Not to mention that a plethora of libraries are out there which a Flutter developer can use to easily implement wonderful mobile app features. The templates can act as a learning material for any Flutter developer especially the beginners. With this in mind, we present you the 25 best open-source, as well as premium, Flutter app templates out there for you to explore. 1. Best Flutter App UI Templates Here is a GitHub repository offering the fully functional Flutter templates. The templates are open-source. Hence, everyone can use it freely. The templates include the design implementation for hotel booking, Fitness, design course, and custom drawer. These templates can help any Flutter developer especially the beginners to learn and get started with their own custom app. You can choose between the hotel booking UI or Fitness app UI. The features like card list view with beautiful UI and designs are intuitive and easy to use. One looking for booking apps, fitness apps or course app in Flutter environment should definitely try these templates out. 2. Flutter Chat App This template offers a complete chat app feature written entirely in Flutter and Dart. The app theme is integrated with Firebase backend. It delivers standard chat app features like real-time conversations, push notifications as well as group chat and video message functionality. It provides 30+ screens with beautiful and subtle chat app UI designs. Our favorite Flutter app theme includes the integration of camera, online status indicator, profile screen options, social media logins, custom loaders, etc. It also houses the modern Android OS functionality such as dark mode. 3 . Flutter Dating App Template This is one of the best premium Flutter app templates out there which was closely based on the Tinder app. It offers a fully functional dating app template with Firebase server backend integration. This template is entirely written in Flutter. The UI flow and designs are inspired by the Tinder UI kit. This template supports the match-making algorithm along with notifications and real-time messaging. The design implementation supports both Android and iOS platforms. Inspired by the Tinder app, this app also incorporates the swipe mechanism along with date recommendations. The features like matches, real-time conversations, dating/personal profiles, localizations are a must-have in any dating app. Thus, this template takes an extra effort to provide these features with optimized performance. The new Android features like dark-mode support is also included. 4. Flutter WordPress App Template This app template is completely written in Flutter and Dart, providing native experience and great performance. It offers optimized collection views, cross-platform support, and modular code. The UI of this template exhibits beautiful newsreader designs. The mobile template is compatible with the integration of any WordPress website. This is one of the best Flutter app templates available on the market. Users can specify the WordPress URL and the app will automatically fetch the article. Moreover, the UI implementations include an automatic slide menu with WordPress categories, articles pagination / batching, for great performance, news list, and pull to refresh functionality. Thus, this template also houses real-time updates which automatically fetches the latest articles on the list. 5. Grocery, Food, Pharmacy, Store Delivery Mobile App with Admin Panel The template is a premium tier template available in the Codecanyon marketplace for the price of $79. This mobile app template delivers market directory management system using a Flutter development environment. It offers Google Maps for showing restaurants on the maps with direction to them. 6. News Buzz New Buzz repository available freely in GitHub delivers a News App template created in Flutter. It uses News API for fetching real-time data and Firebase as the backend and authenticator. The features includes custom news feed based on selected sources, saving articles, explore news based on categories, search for topics, and sharing articles. Hence, this may be the best solution for creating your very own Flutter news app. 7. Flutter Music Player Flutter Music Player is the first open-source Flutter based material design music player with audio plugin to play local music files. The app demo is available in . As of now, the template features only support the Android platform with options for iOS features in the future. The feature integrated for Android platform include fetch local songs (Inbuilt Permission), beautiful UI with multiple themes, animation, full-fledged example, play (local files), stop, pause, seek, shuffle, album art, incomplete, onDuration / onCurrentPosition functionalities. Play Store Moreover, this project also has a plugin to fetch songs and use an audio player that can be used in any of your projects. Thus, this template might be the best solution if you are keen on building your very own music player using Flutter. 8. Fluttergram As the name suggests, the Fluttergram template is an open-source template that provides a fully-functional Instagram clone written in Flutter using Firebase / Firestore. The features are similar to those of the Instagram app. The template offers custom photo feed based on who you follow (using firebase cloud functions), post photo from camera or gallery, like posts, comment on posts, view all comments on a post, search for users, and much more. Thus, if you are looking to implement your own social media app like Instagram, then this template may be the way to get it all started. 9. BookSearch BookSearch app template is an open-source app template related to book collecting and reading. The implementation is totally based on Flutter and Dart. It offers four views for book listing, collecting, searching, and reading. Moreover, there is the feature of searching as well as bookmarking your favorite books. If you are looking to create your very own books aggregator and reading app then this app template may be the best option for you. 10. Beer Me Up This app template is particularly unusual as it has the functionality of logging the beers you drink. However, this app template may be a good source for learning the new Flutter UI, as well as customize the UI based on your needs. The template is a personal beer logging app that allows you to enter every beer you have. Hence, it makes sure to keep a log of them so that you can remember them forever. 11. Food Delivery Flutter + PHP Laravel Admin Panel Here is another premium tier Flutter app template available in the Codecanyon market place for 79 USD. The app template offers multiple Restaurants or Restaurants directory Management System. There is the feature of Google Maps for showing restaurants on the map with directions to them. It delivers entities & Models that are ready to use, clean & organized Dart Language code using MVC Pattern, easy to restyle, and theming by on your branding sites, as well as cash on delivery and payment on pickup methods. 14. Trace Trace is an open-source full-featured, modern crypto portfolio & market explorer. The features include Portfolio Overview, Aggregate Market Explorer, Portfolio Timeline, Transaction History, Portfolio Breakdown, and much more. 15. Taskist Taskist is an open-source to-do list app written completely in Flutter. The UI is simple, beautiful, and intuitive. It offers a task management system with the ability to add multiple tasks in the list format. The app uses Firebase to store the list. The UI features is based on swiping mechanism where the list can swipe right for more. There is an option of striking out the completed tasks. Moreover, it also features the ability to store and maintain tasks based on different days. 16. Fluxstore Pro – Flutter E-commerce Full App Fluxstore is a premium tier e-commerce app inspired by the Flutter framework available in the Codecanyon marketplace for $79. With the aim to reduce hours of business spent on designing, developing, and testing a mobile app, it comes as a complete solution for optimizing to deliver your app to the market with high productivity and cost-efficiency. Moreover, it offers features that satisfy all of the business requirements including e-commerce functionalities, impressive UX design, and smooth performance on both iOS and Android devices. 17. Trinity Orientation 2018 This is an app created for Trinity College at the University of Toronto. The app acts as a companion for all first-year students during orientation week. The features include college sitemap, map functionality, chat functionality, events list, gallery, etc. This app may be useful for creating similar apps for other colleges. Nonetheless, it can be used as the learning mechanism for Flutter development. 18. Deer Here is another to-do list based app template which is available freely in GitHub. This template is a minimalist Todo Planner app built around the idea of efficiency and clean aesthetic. It makes use of the BLoC (Business Logic Component) pattern to manage the app state. It showcases 4 screens. The first one is the list entry screen where you enter the to-do task, then the list screen to view the to-do task list, the screen for task list detail, and the screen to edit the to-do task. Thus, this template can be the right choice to develop your very own to-do list app using Flutter in the BLoC pattern. 19. TailorMade TailorMade is an open-source daily routine management app template made especially for Fashion designers. It started out as an experiment with Flutter, ReBLoC, and but later turned into a valuable tool for managing a Fashion designer’s daily routine. Firebase Cloud Functions Moreover, the template is simple, clean, and overall has a very smooth intuitive feel. This template offers 20+ screens which are all fully functional. Hence, it is highly suggested to check this template out as you can have new features to learn in Flutter and also develop your very own routine management app with some tweaks. 20. instory instory is an open-source app available in Github free of cost. This mobile template delivers a Flutter app with beautiful UI features with 3 screens. The major objective of this app template is to download Instagram stories. Moreover, the app offers the search functionality to search for a particular profile story and download them. 21. StreamApp – Streaming Movies, TV Series and Live TV Stream app is another premium tier app available in the CodeCanyon store for $29. It delivers features for streaming movies, TV series, and live TV. This app template has support for formats on external servers, local or AWS S3 storage. It saves a lot of effort for the administrator with features such as remote configuration, auto-import of information from TheMovieDB, integration with AWS API, Firebase, AdMob, and more. Moreover, the admin panel built using Vue.js and backed by Laravel guarantees you the full power of new technologies. 22. Reply  Flutter This Flutter app template delivers a pixel-perfect implementation of the in . is an email app that makes use of Material Design components and Material Theming to implement an on-brand communication experience. Reply Material Design Case Study Flutter Reply Material Design Case Study It mainly focuses on UI elements of Flutter such as animation, layouts, and transitions. This template aims to showcase how powerful Flutter has become as a UI framework. Hence, this template can be used as a learning mechanism for Flutter app development. 23. Enigma Enigma is an open-source one-to-one chat app developed entirely in Flutter. The backend is based on Firebase implementation. This app template delivers real-time one-to-one chatting experience with minimal chatting features. Since this is a Firebase dependent project, it uses Firebase Phone Authentication, Cloud Firestore, Firebase Storage, and Firebase In-App Messaging. Moreover, the chat interfaces are passcode protected. This template can be a medium to learn how to develop a Flutter chatting app using Firebase features. Hence, you can also develop your very own Flutter chatting app using this template as a starter package. 24. Flutter Pokédex How can we forget one of the legendary anime Pokémon? There has been a number of games based on it as well. Those who watch Pokémon or play their games simply cannot ignore the vital use of the Pokédex. Well, this template offers the functionality of a Pokédex and is completely built using Flutter. The app hosts the Pokémon list along with their data. Moreover, what makes this template great is the Widget combination, animations, and charts used in it. This can be a great app to learn the use of animations and different UI components in Flutter. Even if you are not a fan of Pokémon, you should still check this template out. Conclusion With this plethora of Flutter app templates available out there, one can surely develop the app they are looking for. Most app templates are open-source which means they are free to use as the starter template for creating your very own Flutter application. Some premium tier templates are available which provide powerful features that you can mildly customize based on your needs and deploy to the market. The best Flutter app templates can be the breeding ground for many application startups and solutions for companies. Thus, it is highly suggested to check each one of these flutter app templates for a better understanding of the Flutter app market and its use cases. Did we miss your favorite Flutter app template? Let us know in the comments! Previously published at https://www.instaflutter.com/design/flutter-app-templates-examples-best-25-in-2020/

FIRESTONE COMPLETE AUTO CARE

firestonecompleteautocare.com

1K-5K employees

Since 1926

COMPANY RANKING

FIRESTONE COMPLETE AUTO CARE

EVERGREEN INDEX #4183

Representing this company? Click here to claim and customize this page!

Firestone Complete Auto Care WIKI

Apply to get your Tech Company News Page live on HackerNoon.com today!

FIRESTONE COMPLETE AUTO CARE

firestonecompleteautocare.com

1K-5K employees

Since 1926

COMPANY RANKING

FIRESTONE COMPLETE AUTO CARE

EVERGREEN INDEX #4183

RELATED COMPANIESRANK

STORIES ABOUT FIRESTONE COMPLETE AUTO CARE

Representing this company? Click here to claim and customize this page!

Firestone Complete Auto Care WIKI

Apply to get your Tech Company News Page live on HackerNoon.com today!