"The most effective debugging tool is still careful thought, coupled with judiciously placed print statements." -- Brian Kernighan. Cutting a patient open and using print for debugging used to be the best way to diagnose problems. If you still advocate either one of those as the superior approach to troubleshooting, then you're either facing a very niche problem or need to update your knowledge. This is a frequent occurrence, e.g., this recent tweet: This specific tweet got to the HN front page, and people chimed in with that usual repetitive nonsense. No, it’s not the best way for the vast majority of developers. It should be discouraged just as surgery should be avoided when possible. Fixating on print debugging is a form of a mental block; debugging isn’t just stepping over code. It requires a completely new way of thinking about issue resolution. A way that is far superior to merely printing a few lines. Before I continue, my bias is obvious. I and I . This is a pet peeve of mine. , wrote a book about debugging blog about it a lot I want to start with the exception to the rule, though: when do we need to print something... Logging is NOT Print Debugging! One of the most important debugging tools in our arsenal is a logger, but it is not the same as print debugging in any way: Logger Print Permanence of output Permanent Ephemeral Permanence in code Permanent Should be removed Globally Toggleable Yes No Intention Added as part of design Added ad-hoc A log is something we add with forethought. We want to keep the log for future bugs and might even want to expose it to the users. We can control its verbosity often at the module level and can usually disable it entirely. It’s permanent in code and usually writes to a permanent file we can review at our leisure. Print debugging is code we add to locate a temporary problem. If such a problem has the potential of recurring, then a log would typically make more sense in the long run. This is true for almost every type of system. We see developers adding print statements and removing them constantly instead of creating a simple log to track frequent problems. There are special cases where print debuggings makes some sense, in mission critical embedded systems a log might be impractical in terms of device constraints. Debuggers are awful in those environments, and print debugging is a simple hack. Debugging system-level tools like a kernel, compiler, debugger, or JIT can be difficult with a debugger. Logging might not make sense in all of these cases, e.g., I don’t want my JIT to print every bytecode it’s processing and the metadata involved. Those are the exceptions, not the rules. Very few of us write such tools. I do, and even then, it’s a fraction of my work. For example, when working at Lightrun, I was working on a production debugger. Debugging the agent code that’s connected to the executable was one of the hardest things to do. A mix of C++ and JVM code that’s connected to a completely separate binary... Print debugging of that portion was simpler, and even then, we tried to aim towards logging. However, the visual aspects of the debugger within the server backend and the IDE were perfect targets for the debugger. Why Debug? There are three reasons to use a debugger instead of printouts or even logs: Features - modern debuggers can provide spectacular capabilities that are unfamiliar to many developers. Sadly, there are very few debugging courses in academia since it’s a subject that’s hard to test. Low overhead - in the past, running with the debugger meant slow execution and a lot of overhead. This is no longer true. Many of us use the debug action when launching an application instead of running, and there’s no noticeable overhead for most applications. When there is overhead, some debuggers provide means to improve performance by disabling some features. Library code - a debugger can step into a library or framework and track the bug there. Doing this with print debugging will require compiling code that you might not want to deal with. I dug into the features I mentioned in my book and series on debugging (linked above), but let’s pick a few fantastic capabilities of the debugger that I wrote about in the past. For the sake of positive dialog, here are some of my top features of modern debuggers. Tracepoints Whenever someone opens the print debugging discussion, all I hear is, “I don’t know about tracepoints”. They aren’t a new feature in debuggers, yet so few are aware of them. A tracepoint is a breakpoint that doesn’t stop. It just keeps running. Instead of stopping, you can do other things at that point, such as print to the console. This is similar to print debugging, only it doesn’t suffer from many of the drawbacks: no runtime overhead, no accidental commit to the code base, no need to restart the application when changing it, etc. https://www.youtube.com/watch?v=eXRqKqSp7x0&embedable=true Grouping and Naming The previous video/post included a discussion of grouping and naming. This lets us group tracepoints together, disable them as a group, etc. This might seem like a minor feature until you start thinking about the process of print debugging. We slowly go through the code, adding a print and restarting. Then suddenly, we need to go back, or if a call comes in and we need to debug something else... When we package the tracepoints and breakpoints into a group, we can set aside a debugging session, much like we set aside a branch in version control. It makes it much easier to preserve our train of thought and jump right back to the applicable lines of code. Object Marking When asked about my favorite debugging feature I’m always conflicted, ... It seems like a simple thing; we can mark an object, and it gets saved with a specific name. Object Marking is one of my top two features However, this is a powerful and important feature. I used to write down the pointers to objects or memory areas while debugging. This is valuable as sometimes an area of memory would look the same but would have a different address, or it might be hard to track objects with everything going on. Object Marking allows us to save a global reference to an object and use it in conditional breakpoints or for visual comparison. https://www.youtube.com/watch?v=DGjVVKCNosM&embedable=true Renderers My other favorite feature is ; it lets us define how elements look in the debugger watch area. Imagine you have a sophisticated object hierarchy but rarely need that information... A renderer lets you customize the way IntelliJ/IDEA presents the object to you. the renderer https://www.youtube.com/watch?v=oaUf8KXHsd0&embedable=true Tracking New Instances One of the often overlooked capabilities of the debugger is . A Java debugger can show you a searchable set of all object instances in heap, that is a fantastic capability that can expose unintuitive behavior But it can go further, it can track new allocations of an object and provide you with the stack to the applicable object allocation. memory tracking https://www.youtube.com/watch?v=dFOFOEg2W4k&embedable=true Tip of the Iceberg I wrote a lot about debugging, so there’s no point in repeating all of it in this post. If you’re a person who feels more comfortable using print debugging, then ask yourself this: why? Don’t hide behind an out-of-date Brian Kernighan quote. Things change. Are you working in one of the edge cases where print debugging is the only option? Are you treating logging as print debugging or vice versa? Or is it just that print debugging was how your team always worked, and it stuck in place? If it’s one of those, then it might be time to re-evaluate the current state of debuggers. Also published . here

The Power of Git Bisect as Your Debugging Ally

Revisiting Strace: Simple is Beautiful

Debug Agent

Buy My Book

Learn on my YouTube Channel

Read My Stories

Newsletter

Follow me on Twitter

Too Long; Didn't Read

Make resilience your competitive advantage

Stop Cutting Your Patients Open: Rethinking Print for Debugging 

Stop Cutting Your Patients Open: Rethinking Print for Debugging

About Author

Comments

TOPICS

THIS ARTICLE WAS FEATURED IN

Related Stories

Untitled Story

Front End Debugging Part 3: Debugging Networking Communication Issues

The Noonification: Neuralink: Elon Pledges to Get a Brain Implant (12/14/2022)

A Deep Insight on Memory Debugging

A Look into Remote Debugging and Developer Observability

An Introduction to 140 Second Ducklings: What is Debugging?

Front End Debugging Part 3: Debugging Networking Communication Issues

The Noonification: Neuralink: Elon Pledges to Get a Brain Implant (12/14/2022)

A Deep Insight on Memory Debugging

A Look into Remote Debugging and Developer Observability

An Introduction to 140 Second Ducklings: What is Debugging?

Light-Mode

Classic

Newspaper

Dark-Mode

Neon Noir

Minty

HN StartUps