How To Build a GPS Tracker From Scratch Using Arduino

Written by duanebester | Published 2020/08/02
Tech Story Tags: iot | arduino | imu | bluetooth | sensor | hardware | firmware | gps

TLDR Arduino Nano 33 BLE Sense with an SD card and GPS module for a side project that logs GPS and IMU data. Unbeknownst to me at the time, these boards aren’t footprint-compatible, so I combined them with a breadboard. It took a little while to get all the libraries installed and everything connected appropriately. The biggest challenge was the GPS module. The tricky part here was making sure to remove the DATALOG.CSV file every time we start up.via the TL;DR App
no story
Written by duanebester | Hardware/Firmware/Software Engineer
Published by HackerNoon on 2020/08/02
ABOUTHow hackers start their afternoons. We publish tech stories and build publishing software.

READEntirely free library read by hundreds of millions to learn anything about any technology.

WRITEHackerNoon elevates quality technology writing far and wide across the interwebs.

PARTNERHackerNoon works directly with tech companies to place ads by content relevancy