9 Steps To Create A Motion Control Project In TIA Portal With Sinamics S120

Written by karthik-muthineni | Published 2021/04/18
Tech Story Tags: siemens | automation | industry4.0 | electric-circuit | internet-of-things | system-on-a-chip | motion-control | tutorial

TLDR This blog discusses about controlling Sinamics S120 drive motion using Simatic S7–1500 and TIA Portal software. In our example, a drive unit is to be assembled for a motor. The Control Unit must be connected to S7-1500 via PROFINET (Figure a) The control unit must be configured using STARTER software. The PLC should be configured as MAS, which gives the drive components the control role to “master” The drive components are wired by means of Drive–Cliq.via the TL;DR App
no story
Written by karthik-muthineni | Researcher, working in the domain of 5G, Indoor Localization, and Cyber-Physical Systems. #INFLUENCER
Published by HackerNoon on 2021/04/18
ABOUTHow hackers start their afternoons. We publish tech stories and build publishing software.

READEntirely free library read by hundreds of millions to learn anything about any technology.

WRITEHackerNoon elevates quality technology writing far and wide across the interwebs.

PARTNERHackerNoon works directly with tech companies to place ads by content relevancy