Following the release of , I wanted to revisit the performance differences between Diesel and rust-postgres to see if things had changed significantly Diesel 0.9.0 since I last measured both in 0.1.0. TL;DR: Diesel consistently outperforms rust-postgres by 25–30% in idiomatic code. It is also more concise and catches errors at compile time to help you write working code faster. You can find the full benchmarking code . The rust-postgres benchmark could be further optimized to find about a 10% performance increase. Doing this, however, results in code that is more brittle and harder to understand. here If you’re looking for something to do this holiday season, and you haven’t tried Diesel yet, check out our . The rest of this article is going to examine the differences between the usage of the two. Getting Started guide The benchmark results are based purely upon the results of select statements, not the insertion of the data. The majority of applications backed by a SQL database are read heavy, not write-heavy. Additionally, rust-postgres relies heavily on dynamic dispatch for bind parameters. This means that for queries with an excessive amount of bind parameters such as batch inserts, its performance was reduced to a point that I didn’t feel was a fair comparison. Setting up data We’ll look at two benchmarks. The first one will set up with some number of rows into a single table with 3 columns, and then perform or equivalent. The second will use two tables, with more data, and a join between the two. This is the setup for Diesel: SELECT * FROM users The definition of is at the top and looks like: NewUser The comes from the crate, and generates the appropriate code to use this struct in an insert statement. We know the database schema from a line at the top that looks like which will load the database schema at compile time. Using a vector or slice of for a batch insert works automatically. We’re doing an on the result to double check that we actually inserted the number of rows we expected. #[derive(Insertable)] diesel_codegen infer_schema!("env:DATABASE_URL") NewUser assert_eq! The setup for the rust-postgres benchmark is a bit more complex. Of course this is always going to be a bit more verbose, since we have to construct the SQL manually. For batch inserts, this means lots of dynamic query construction of bits of SQL that are nothing more than which is always difficult to read. This is to be expected, rust-postgres isn’t trying to be a query builder. However, the hoops we had to jump through with the bind parameters was surprising to me. ($1, $2) The rust-postgres crate defers the serialization of the bind parameters as long as possible. However, it also doesn’t provide any data structure with which to hold the bind parameters. This means that we’ll have to stick them into a list of trait objects, even when all the binds are of the same type. This also means that it’s relying on dynamic dispatch, which will severely hinder the ability for the compiler to optimize the serialization code. The API provided by the rust-postgres crate seems like it’s probably fine if you’re building simple queries or if all your bind values are hard coded or simple borrows from something that’s already in scope. But once you’re doing anything dynamic, it’s quite hard to figure out exactly what to do. It took me quite a while to figure out the exact incantation I needed to construct the borrowed bind params there. Finally, since we’re just operating on simple SQL strings, we also need a check to make sure we’re not trying to insert 0 rows. Since rust-postgres only deals with raw SQL, it would have no way of understanding our intent to handle that case automatically for us. Simple Query Execution For the first benchmark, we are going to execute or equivalent, deserialize all of the rows into a , and then check that the length of that vector is what we expect. The struct definition for both benchmarks looks like this: SELECT * FROM users Vec<User> In the Diesel benchmark, that struct is annotated with , which generates the code to deserialize the row into the struct. The benchmark for Diesel looks like this: #[derive(Queryable)] One point of note is that the query this generates is slightly different that you would write yourself. The exact query is . We have to add a turbofish for here, since we’re never using the vector and the compiler wouldn’t be able to figure out the type. SELECT "users"."id", "users"."name", "users"."hair_color" FROM "users" ::<User> The rust-postgres benchmark is somewhat similar: One point of note is that we’ve written the deserialization code inline, rather than extracting a function called or similar. Creating that function is a common pattern in code using rust-postgres in the wild, but it’s ultimately quite fragile. Outside of this one query, we don’t know whether the columns have been renamed or not. As we’ll see later, a rename is often required. We also don’t know if this code appears inside of a join or not. If it’s on the right side of a left outer join, we’ll need to return instead. Since a function would be of limited reuse, I’ve opted not to extract one. User::from_row Option<User> User::from_row We could also gain some improvement here if we were to list out each of the columns explicitly, and fetch the result by index rather than by name. The goal of this benchmark, however, was to write code which from the user’s point of view takes the same amount of effort and does approximately the same thing. Fetching results by index is extremely brittle, and since the type knows nothing about the underlying SQL type of the data, it’s extremely easy to accidentally deserialize junk data into the wrong type. All code I’ve seen in the wild accesses fields by name, and that’s probably the right decision. Row These were the results for the “simple query” benchmark. There’s a good bit of variance due to the overhead of executing a query with postgres, but Diesel consistently came in at between 25% and 30% faster for every run. Complex Queries For the second benchmark, we’ll get a little more complex. For the data, we’ll alternate hair colors for users, and give every third user a post. This is the setup code for Diesel. For , we’re working with mostly static data. is to work with both owned and borrowed data, so you can use whatever is most convenient for that situation. In the case of where we were generating dynamic strings, it was much easier to put the result in an owned string. NewPost #[derive(Insertable)] designed NewUser The rust-postgres setup is similar to the first benchmark as well. Collecting the bind parameters for the posts query was even more difficult than the first benchmark. If the data was just *a bit* more static, we would have been able to put it into a off the bat, as its author seemed to have intended. However, we have to add 1 to the counter to get the , meaning that we have a dynamically constructed value. Since this time the types of the bind parameters are different, we have to box them up to get a single type for the vector. Even after that though, we still need the second iteration to go from to which finally we can borrow to the specific that rust-postgres wants. Vec<&ToSql> user_id Vec<Box<ToSql>> Vec<&ToSql> &[&ToSql] The query for the second benchmark is or equivalent. The code for the Diesel version looks like this: SELECT * FROM users LEFT OUTER JOIN posts ON posts.user_id = users.id WHERE hair_color = "black" ORDER BY name DESC You’ll notice that we’re never specifying the clause for this query. The information on how to perform the join is generated by an annotation on that looks like . We assume by default that the foreign key is in the form . If you don’t use this convention, or have a more complex join, it’s an easy default to override. ON User #[has_many(posts)] parent_id The rust-postgres code for this benchmark looks like this: The query here is much longer. We need to list out every column manually, and alias them so we can be sure we’re fetching the right column later. The API provided by rust-postgres does not let you specify the table name for the column. In the case of conflict, doing will silently give you whichever column came first, with no indication that you might be using the wrong data. row.get("id") id We’ve once again performed our deserialization inline. This example demonstrates my point from earlier. The common abstraction that many codebases use is quite fragile. Unfortunately, the rust-postgres crate doesn’t provide the APIs needed to write generic deserialization code for these sort of cases. from_row One high point for rust-postgres here was that this was a much easier query to execute than the rest. All our bind parameters are static, so we were able to write it inline with the query. I believe this is the type of case that its author optimized for, and it works quite well when you stay within those boundaries. The results of the second benchmark were: Conclusion Hopefully this helps to illustrate some of the key differences between Diesel and rust-postgres. Despite the focus on remaining lower level than Diesel, rust-postgres does not provide any improvement in performance over Diesel. It should be noted that the rust-postgres benchmarks compiled in 2.76 seconds, while the Diesel benchmarks took 3.4. I expect that gap to increase on large codebases. The binary for the rust-postgres benchmarks was roughly 25% larger than the binary for the Diesel benchmarks, and I would expect Diesel’s binary size to remain smaller regardless of the size of the codebase. I truly believe that the safety guarantees that Diesel provide increase developer significantly. It took me many tries to get the rust-postgres benchmarks to actually work. The feedback cycle of waiting for the runtime errors to tell me what to do, assuming the message was helpful at all, was quite slow compared to the quick compile-time feedback given by Diesel. productivity If you haven’t already given Diesel a try, I hope you’ll take the opportunity to do so over the holiday break. You can learn more at http://diesel.rs Thanks for reading! is how hackers start their afternoons. We’re a part of the family. We are now and happy to opportunities. Hacker Noon @AMI accepting submissions discuss advertising &sponsorship To learn more, , , or simply, read our about page like/message us on Facebook tweet/DM @HackerNoon. If you enjoyed this story, we recommend reading our and . Until next time, don’t take the realities of the world for granted! latest tech stories trending tech stories

Facebook

Fetch

Too Long; Didn't Read

In your car, at home, or at work — Bosch technology shapes many areas of life.

Comparing Diesel and rust-postgres

Too Long; Didn't Read

Companies Mentioned

Sean Griffin

About Author

TOPICS

THIS ARTICLE WAS FEATURED IN...

Comparing Diesel and rust-postgres

Too Long; Didn't Read

Companies Mentioned

Sean Griffin

About Author

TOPICS

THIS ARTICLE WAS FEATURED IN...

RELATED STORIES