Empowering everyone with the Soffos Platform for scalable, secure, and streamlined conversational & generative AI

Soffos Inc.

LIRC configuration “LIRC is a package that allows you to decode and send infra-red signals of many (but not all) commonly used remote controls.”, as per their . official website Configure LIRC for Raspberry Pi On your Raspberry Pi, run the following to install LIRC: sudo apt-get install lirc Add LIRC to your /etc/modules file by running the command below and adding the following: sudo /etc/modules ## /etc/modules   lirc_dev   lirc_rpi gpio_in_pin=23 gpio_out_pin=22 Change your /etc/lirc/hardware.conf file by running the command below and adding the following: sudo nano /etc/lirc/hardware.conf

## /etc/lirc/hardware.conf## Arguments which will be used when launching lircdLIRCD_ARGS="--uinput"# Don't start lircmd even if there seems to be a good config file# START_LIRCMD=false# Don't start irexec, even if a good config file seems to exist.# START_IREXEC=false# Try to load appropriate kernel modulesLOAD_MODULES=true# Run "lircd --driver=help" for a list of supported drivers.DRIVER="default"# usually /dev/lirc0 is the correct setting for systems using udevDEVICE="/dev/lirc0"MODULES="lirc_rpi"# Default configuration files for your hardware if anyLIRCD_CONF=""LIRCMD_CONF="" Change your /boot/config.txt file by running the command below and adding the following: sudo nano /boot/config.txt

## /boot/config.txt dtoverlay=lirc-rpi,gpio_in_pin=23,gpio_out_pin=22 Now, restart LIRC so it picks up these changes: sudo /etc/init.d/lirc stopsudo /etc/init.d/lirc start Configure LIRC for your particular remote This step will configure LIRC to blink the IR LED in the correct cadence, mimicking commands given by your remote control. This step takes a bit of time and involves a lot pointing and clicking at the IR receiver. Just follow the instructions LIRC gives in the terminal. # Stop LIRCsudo /etc/init.d/lirc stop# Create new recording in config file ~/lircd.conf# This will take your through a series of steps to follow# Make sure you add the power button and name it 'KEY_POWER'irrecord -d /dev/lirc0 ~/lircd.conf# Move the created config file to the folder where LIRC looks for the config filessudo cp ~/lircd.conf /etc/lirc/lircd.conf# Start LIRCsudo /etc/init.d/lirc start Raspberry Pi files Our main file, index.py, will control our Alexa Skill and tell LIRC to blink the LED for a given command (which will be ‘KEY_POWER’). index.py ## index.py import os import jsonfrom pprint import pprint from flask import Flaskfrom flask_ask import Ask, statement, question, session app = Flask(__name__)ask = Ask(app, '/') lirc_file_conf = ' 'power_button_command = 'KEY_POWER' ~/lircd.conf .launchdef start_skill():welcome_message = 'How should the t.v. update?'return question(welcome_message) @ask .intent('ChangePowerIntent')def change_power(power_value):# Tell LIRC to send IR LED blink pattern to turn TV on/offos.system('irsend SEND_ONCE {} {}'.format(lirc_file_conf, power_button_command)) @ask text = 'Turning the t.v. {}'.format(power\_value)  
return statement(text) if __name__ == '__main__':app.run(debug=True) Run the file by running the following from your terminal: sudo python index.py ngrok Head over to where you have on your Raspberry Pi and run the following command to open up a local tunnel to your index.py file ngrok ./ngrok http 5000 Copy the URL it created (we’ll use this in the next step when we tell our Alexa where to find its Skill through HTTPS). Amazon Alexa Skill Dashboard Head over to the and sign in. Under Alexa, click on the ‘Alexa Skills Kit’ and click ‘Get Started >’. Amazon Developer Dashboard Click ‘Add a New Skill’ on the top right corner’. In the ‘Skills Information’ tab, the field to pay attention to is ‘Invocation Name’. This is the phrase a user will say to begin the Skill. Make it this: the t.v. to update This way, you will say to Alexa, “Alexa, ask the TV to update.” In the ‘Interaction Model’ tab, in the ‘Intent Schema’ add the following so Alexa knows what function in the index.py file corresponds to what action and what values you can tell it (which is programmed in the next step): {"intents": [{"slots": [{"name": "power_value","type": "LIST_OF_POWERS"}],"intent": "ChangePowerIntent"}]} Create a custom slot in ‘Custom Slot Types’, name it LIST_OF_POWERS, and add the following to it: onoff This way, Alexa knows you can only tell it “on” or “off”. In ‘Sample Utterances’, add the following so Alexa knows what command to respond to: ChangePowerIntent turn the t.v. {power_value} In the ‘Configuration’ Tab, change the endpoint to ‘HTTPS’ and add the ‘Default’ URL that was spit out by ngrok followed by a backslash. This is basically telling Alexa to look at the / endpoint for all the information for its Skill. https://aa87e7e5.ngrok.io Save everything. Try it out! If all went according to plan, ask Alexa, “Alexa, ask the TV to update.” She will respond with “How should the TV update?” You’ll say, “Turn the TV on.” Your TV should then satisfyingly turn on. All soldered together Departing notes To add more functionalities — like turning the volume up, down, changing channels, changing sources, muting — play around with what series of commands LIRC must perform to accomplish that particular action. This may include navigating through menus, pushing an “Ok” button, etc. Use Python’s for pausing in between “key” pushes. ‘time’ library Source code For the fully complete source code (with more functionality) of this project, see . this Github repo Increase volume Change source Turn TV off

SOFFOS INC.

soffos.ai

-- employees

Since n.d.

COMPANY RANKING

SOFFOS INC.

EVERGREEN INDEX #9467

Representing this company? Click here to claim and customize this page!

Soffos Inc. WIKI

Apply to get your Tech Company News Page live on HackerNoon.com today!

SOFFOS INC.

soffos.ai

-- employees

Since n.d.

COMPANY RANKING

SOFFOS INC.

EVERGREEN INDEX #9467

RELATED COMPANIESRANK

STORIES ABOUT SOFFOS INC.

Representing this company? Click here to claim and customize this page!

Soffos Inc. WIKI

Apply to get your Tech Company News Page live on HackerNoon.com today!