paint-brush
Take your Materialized Views to the Next Level by Joining MySQL and Postgresby@bobbyiliev
545 reads
545 reads

Take your Materialized Views to the Next Level by Joining MySQL and Postgres

by Bobby IlievDecember 12th, 2021
Read on Terminal Reader
Read this story w/o Javascript
tldt arrow

Too Long; Didn't Read

This is a self-contained demo using Materialize.com. This demo would show you how to use Materialize to join MySQL and Postgres in a live materialized view. For this demo, we are going to monitor the orders on our demo website and generate events that could, later on, be used to send notifications when a cart has been abandoned for a long time. The orders would be stored in a. database, Debezium streams the changes out of the database writes to a Redpanda topic. We would then ingest this. topic into Materialize directly along with users from the Postgres database. In Materialize we will join our orders and users together, do some filtering and create a materialized. view that. create a.

Company Mentioned

Mention Thumbnail
featured image - Take your Materialized Views to the Next Level by Joining MySQL and Postgres
Bobby Iliev HackerNoon profile picture


This is a self-contained demo using Materialize.


This demo would show you how to use Materialize to join MySQL and Postgres in a live materialized view.


For this demo, we are going to monitor the orders on our demo website and generate events that could, later on, be used to send notifications when a cart has been abandoned for a long time.

mz-abandoned-cart-demo

Prerequisites

Before you get started, you need to make sure that you have Docker and Docker Compose installed.

You can follow the steps here on how to install Docker: Installing Docker

Overview

As shown in the diagram above we will have the following components:

  • A mock service to continually generate orders.

  • The orders would be stored in a MySQL database.

  • As the database writes occur, Debezium streams the changes out of MySQL to a Redpanda topic.

  • We also would have a Postgres database where we would get our users from.

  • We would then ingest this Redpanda topic into Materialize directly along with the users from the Postgres database.

  • In Materialize we will join our orders and users together, do some filtering and create a materialized view that shows the abandoned cart information.

  • We will then create a sink to send the abandoned cart data out to a new Redpanda topic.

  • You could, later on, use the information from that new topic to send out notifications to your users and remind them that they have an abandoned cart.


As a side note here, you would be perfectly fine using Kafka instead of Redpanda. I just like the simplicity that Redpanda brings to the table, as you can run a single Redpanda instance instead of all of the Kafka components.

Running the demo

First, start by cloning the repository:

git clone https://github.com/bobbyiliev/materialize-tutorials.git

After that you can access the directory:

cd materialize-tutorials/mz-join-mysql-and-postgresql

Let's start by first running the Redpanda container:

docker-compose up -d redpanda

Build the images:

docker-compose build

Finally, start all of the services:

docker-compose up -d

In order to Launch the Materialize CLI, you can run the following command:

docker-compose run mzcli


This is just a shortcut to a docker container with postgres-client pre-installed, if you already have psql you could run psql -U materialize -h localhost -p 6875 materialize instead.

Create a Materialize Kafka Source

Now that you're in the Materialize CLI, let's define the orders tables in the mysql.shop database as Redpanda sources:

CREATE SOURCE orders
FROM KAFKA BROKER 'redpanda:9092' TOPIC 'mysql.shop.orders'
FORMAT AVRO USING CONFLUENT SCHEMA REGISTRY 'http://redpanda:8081'
ENVELOPE DEBEZIUM;


If you were to check the available columns from the orders source by running the following statement:

SHOW COLUMNS FROM orders;


You would be able to see that, as Materialize is pulling the message schema data from the Redpanda registry, it knows the column types to use for each attribute:

    name      | nullable |   type
--------------+----------+-----------
 id           | f        | bigint
 user_id      | t        | bigint
 order_status | t        | integer
 price        | t        | numeric
 created_at   | f        | text
 updated_at   | t        | timestamp

Create materialized views

Next, we will create our first Materialized View, to get all of the data from the orders Redpanda source:

CREATE MATERIALIZED VIEW orders_view AS
SELECT * FROM orders;
CREATE MATERIALIZED VIEW abandoned_orders AS
    SELECT
        user_id,
        order_status,
        SUM(price) as revenue,
        COUNT(id) AS total
    FROM orders_view
    WHERE order_status=0
    GROUP BY 1,2;


You can now use SELECT * FROM abandoned_orders; to see the results:

SELECT * FROM abandoned_orders;


For more information on creating materialized views, check out the Materialized Views section of the Materialize documentation.

Create Postgres source

There are two ways to create a Postgres source in Materialize:

  • Using Debezium just like we did with the MySQL source.
  • Using the Postgres Materialize Source, which allows you to connect Materialize direct to Postgres so you don't have to use Debezium.


For this demo, we will use the Postgres Materialize Source just as a demonstration on how to use it, but feel free to use Debezium instead.


To create a Postgres Materialize Source run the following statement:

CREATE MATERIALIZED SOURCE "mz_source" FROM POSTGRES
CONNECTION 'user=postgres port=5432 host=postgres dbname=postgres password=postgres'
PUBLICATION 'mz_source';


A quick rundown of the above statement:

  • MATERIALIZED: Materializes the PostgreSQL source’s data. All of the data is retained in memory and makes sources directly selectable.
  • mz_source: The name for the PostgreSQL source.
  • CONNECTION: The PostgreSQL connection parameters.
  • PUBLICATION: The PostgreSQL publication, containing the tables to be streamed to Materialize.


Once we've created the PostgreSQL source, in order to be able to query the PostgreSQL tables, we would need to create views that represent the upstream publication’s original tables. In our case, we only have one table called users so the statement that we would need to run is:

CREATE VIEWS FROM SOURCE mz_source (users);


To see the available views execute the following statement:

SHOW FULL VIEWS;


Once that is done, you can query the new views directly:

SELECT * FROM users;

Next, let's go ahead and create a few more views.

Create Kafka Sink

Sinks let you send data from Materialize to an external source. For this Demo, we will be using Redpanda.


Redpanda is a Kafka API-compatible and Materialize can process data from it just as it would process data from a Kafka source.


Let's create a materialized view, that will hold all of the high volume unpaid orders:

 CREATE MATERIALIZED VIEW high_value_orders AS
      SELECT
        users.id,
        users.email,
        abandoned_orders.revenue,
        abandoned_orders.total
      FROM users
      JOIN abandoned_orders ON abandoned_orders.user_id = users.id
      GROUP BY 1,2,3,4
      HAVING revenue > 2000;


As you can see, here we are actually joining the users view which is ingesting the data directly from our Postgres source, and the abandond_orders view which is ingesting the data from the Redpanda topic, together.


Let's create a Sink where we will send the data of the above materialized view:

CREATE SINK high_value_orders_sink
    FROM high_value_orders
    INTO KAFKA BROKER 'redpanda:9092' TOPIC 'high-value-orders-sink'
    FORMAT AVRO USING
    CONFLUENT SCHEMA REGISTRY 'http://redpanda:8081';


Now if you were to connect to the Redpanda container and use the rpk topic consume command, you will be able to read the records from the topic.


However, as of the time being, we won’t be able to preview the results with rpk because it’s AVRO formatted. Redpanda would most likely implement this in the future, but for the moment, we can actually stream the topic back into Materialize to confirm the format.


First, get the name of the topic that has been automatically generated:

SELECT topic FROM mz_kafka_sinks;

Output:

                              topic
-----------------------------------------------------------------
 high-volume-orders-sink-u12-1637586945-13670686352905873426


For more information on how the topic names are generated check out the documentation here.


Then create a new Materialized Source from this Redpanda topic:

CREATE MATERIALIZED SOURCE high_volume_orders_test
FROM KAFKA BROKER 'redpanda:9092' TOPIC ' high-volume-orders-sink-u12-1637586945-13670686352905873426'
FORMAT AVRO USING CONFLUENT SCHEMA REGISTRY 'http://redpanda:8081';


Make sure to change the topic name accordingly!


Finally, query this new materialized view:

SELECT * FROM high_volume_orders_test LIMIT 2;


Now that you have the data in the topic, you can have other services connect to it and consume it and then trigger emails or alerts for example.

Metabase

In order to access the Metabase instance visit http://localhost:3030 if you are running the demo locally or http://your_server_ip:3030 if you are running the demo on a server. Then follow the steps to complete the Metabase setup.


Make sure to select Materialize as the source of the data. Once ready you will be able to visualize your data just as you would with a standard PostgreSQL database.

Stopping the Demo

To stop all of the services run the following command:

docker-compose down

Conclusion

As you can see, this is a very simple example of how to use Materialize. You can use Materialize to ingest data from a variety of sources and then stream it to a variety of destinations.


In the second part of this demo, we will build upon the current demo and add more functionality to make represent a more realistic eCommerce website and a more realistic data pipeline.

Helpful resources:

  • CREATE SOURCE: PostgreSQL
  • CREATE SOURCE
  • CREATE VIEWS
  • SELECT


First published here