Relativity: The Special and General Theory by Albert Einstein is part of HackerNoon’s Book Blog Post series. You can jump to any chapter in this book here . CHAPTER II. THE SYSTEMS OF CO-ORDINATE On the basis of the physical interpretation of distance which has been indicated, we are also in a position to establish the distance between two points on a rigid body by means of measurements. For this purpose we require a “distance” (rod S) which is to be used once and for all, and which we employ as a standard measure. If, now, A and B are two points on a rigid body, we can construct the line joining them according to the rules of geometry; then, starting from A, we can mark off the distance S time after time until we reach B. The number of these operations required is the numerical measure of the distance AB. This is the basis of all measurement of length. 1 Every description of the scene of an event or of the position of an object in space is based on the specification of the point on a rigid body (body of reference) with which that event or object coincides. This applies not only to scientific description, but also to everyday life. If I analyse the place specification “Times Square, New York,” I arrive at the following result. The earth is the rigid body to which the specification of place refers; “Times Square, New York,” is a well-defined point, to which a name has been assigned, and with which the event coincides in space. 2 3 This primitive method of place specification deals only with places on the surface of rigid bodies, and is dependent on the existence of points on this surface which are distinguishable from each other. But we can free ourselves from both of these limitations without altering the nature of our specification of position. If, for instance, a cloud is hovering over Times Square, then we can determine its position relative to the surface of the earth by erecting a pole perpendicularly on the Square, so that it reaches the cloud. The length of the pole measured with the standard measuring-rod, combined with the specification of the position of the foot of the pole, supplies us with a complete place specification. On the basis of this illustration, we are able to see the manner in which a refinement of the conception of position has been developed. (a)We imagine the rigid body, to which the place specification is referred, supplemented in such a manner that the object whose position we require is reached by the completed rigid body.(b)In locating the position of the object, we make use of a number (here the length of the pole measured with the measuring-rod) instead of designated points of reference.We speak of the height of the cloud even when the pole which reaches the cloud has not been erected. By means of optical observations of the cloud from different positions on the ground, and taking into account the properties of the propagation of light, we determine the length of the pole we should have required in order to reach the cloud. From this consideration we see that it will be advantageous if, in the description of position, it should be possible by means of numerical measures to make ourselves independent of the existence of marked positions (possessing names) on the rigid body of reference. In the physics of measurement this is attained by the application of the Cartesian system of co-ordinates. In practice, the rigid surfaces which constitute the system of co-ordinates are generally not available; furthermore, the magnitudes of the co-ordinates are not actually determined by constructions with rigid rods, but by indirect means. If the results of physics and astronomy are to maintain their clearness, the physical meaning of specifications of position must always be sought in accordance with the above considerations. 4 We thus obtain the following result: Every description of events in space involves the use of a rigid body to which such events have to be referred. The resulting relationship takes for granted that the laws of Euclidean geometry hold for “distances;” the “distance” being represented physically by means of the convention of two marks on a rigid body. Here we have assumed that there is nothing left over i.e. that the measurement gives a whole number. This difficulty is got over by the use of divided measuring-rods, the introduction of which does not demand any fundamentally new method. 1 ↑ Einstein used “Potsdamer Platz, Berlin” in the original text. In the authorised translation this was supplemented with “Trafalgar Square, London”. We have changed this to “Times Square, New York”, as this is the best known location to English speakers in the present day. 2 ↑ It is not necessary here to investigate further the significance of the expression “coincidence in space.” This conception is sufficiently obvious to ensure that differences of opinion are scarcely likely to arise as to its applicability in practice. 3 ↑ A refinement and modification of these views does not become necessary until we come to deal with the general theory of relativity, treated in the second part of this book. 4 ↑ About HackerNoon Book Series: We bring you the most important technical, scientific, and insightful public domain books. This book is part of the public domain. Einstein, Albert, 2004. Relativity: The Special and General Theory. Urbana, Illinois: Project Gutenberg. Retrieved May 2022 from https://www.gutenberg.org/files/5001/5001-h/5001-h.htm#ch2 This eBook is for the use of anyone anywhere at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.org, located at https://www.gutenberg.org/policy/license.html. Photo by Andrew George on Unsplash

Relativity: The Special and General Theory: Chapter II - THE SYSTEMS OF CO-ORDINATE

About Author

Comments

TOPICS

THIS ARTICLE WAS FEATURED IN

Related Stories

A Few Inferences From the General Principle of Relativity

A Few Inferences From the General Principle of Relativity

A Short Biographical Note on Albrecht Einstein

Behaviour of Clocks and Measuring-Rods on a Rotating Body of Reference

Community in 12 Quotes

Cosmological Difficulties of Newton's Theory

A Few Inferences From the General Principle of Relativity

A Few Inferences From the General Principle of Relativity

A Short Biographical Note on Albrecht Einstein

Behaviour of Clocks and Measuring-Rods on a Rotating Body of Reference

Community in 12 Quotes

Cosmological Difficulties of Newton's Theory

Light-Mode

Classic

Newspaper

Minty

Dark-Mode

Neon Noir

Minty

HN StartUps