This article will teach you how to set up Ubuntu 20.04 LTS on a Vagrant virtual box. It will also show how to configure the Virtual box to suit your preferences. Once we’re done with installation and configuration, I will show you how to move the ip configuration file from your virtual machine to your host machine.
If you’ve read this far, thank you for taking the time. This is one of my first tutorials and I’d love to hear your thoughts in the comments.
Let’s get to it.
To begin, you need to go to the official vagrant website and download vagrant on your host or the local machine. Once you’re done with the download, the installation is pretty straightforward forward just follow the onscreen prompts. To confirm whether or not it has been installed, go to your terminal/cmd depending on the type of machine you’re using.
vagrant
You should see something like this:
achebe@okechukwus-MacBook-Pro ~ % vagrant Usage: vagrant [options] <command> [<args>]
-h, --help Print this help.
Common commands:
autocomplete manages autocomplete installation on host
box manages boxes: installation, removal, etc.
cloud manages everything related to Vagrant Cloud
Once you’re done with this, the next step is to setup the virtual box on your machine. For ease, it will make sense if all the installed resources are in one folder. So, we create a folder inside the existing one. like this:
achebe@okechukwus-MacBook-Pro ~ % cd Desktop
achebe@okechukwus-MacBook-Pro Desktop % mkdir -p TestVagrant/Box/Ubuntu_20_04
achebe@okechukwus-MacBook-Pro Desktop % cd TestVagrant/Box/Ubuntu_20_04
After creating the Ubuntu_20_04 folder inside the ‘Desktop/Testvagrant/Box’ folder, the next step is to install the vagrant ubuntu using the vagrant init command. like so:
vagrant init ubuntu/focal64
You should get this output:
A Vagrantfile has been placed in this directory. You are now
ready to vagrant up your first virtual environment! Please read
the comments in the Vagrantfile as well as documentation on
vagrantup.com for more information on using Vagrant.
Next, start up your virtual machine with this command:
vagrant up
Once done, you’re set to use your virtual machine with ubuntu inside it.
To enter your machine, use this command:
vagrant ssh
You should get this output:
Welcome to Ubuntu 20.04.4 LTS (GNU/Linux 5.4.0-122-generic x86_64)
Documentation: https://help.ubuntu.com
Management: https://landscape.canonical.com
Support: https://ubuntu.com/advantage
System information as of Wed Aug 10 23:19:29 UTC 2022
System load: 0.01 Processes: 118
Usage of /: 4.1% of 38.70GB Users logged in: 0
Memory usage: 23% IPv4 address for enp0s3: 10.0.2.15
Swap usage: 0%
0 updates can be applied immediately.
To make sure that your virtual machine is indeed running ubuntu, type this command:
hostnamectl'
I got this result on my own end:
vagrant@ubuntu-focal:~$ hostnamectl
Static hostname: ubuntu-focal
Icon name: computer-vm
Chassis: vm
Machine ID: 87a9bd2baeb54bcda24765b89147565a
Boot ID: 3b9ba20e3d494ac89568bb487c447a7f
Virtualization: oracle
Operating System: Ubuntu 20.04.4 LTS
Kernel: Linux 5.4.0-122-generic
Architecture: x86-64
As it is, we’re done with the installation of Ubuntu on our virtual machine.
The next thing to do is to explore configuration. For instance, setting our private network set to dhcp.
To get the IP address of your virtual machine, use iconfig.
If you get this error…
vagrant@ubuntu-focal:~$ ifconfig
Command 'ifconfig' not found, but can be installed with:
apt install net-tools
Please ask your administrator.
You can easily resolve it with the sudo command. like so:
sudo apt install net-tools
Then, run the iconfig' command again and you should get this:
vagrant@ubuntu-focal:~$ ifconfig
enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.2.15 netmask 255.255.255.0 broadcast 10.0.2.255
inet6 fe80::52:20ff:fe6d:cccd prefixlen 64 scopeid 0x20<link>
ether 02:52:20:6d:cc:cd txqueuelen 1000 (Ethernet)
RX packets 80714 bytes 112088617 (112.0 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 11575 bytes 942445 (942.4 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 49 bytes 4998 (4.9 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 49 bytes 4998 (4.9 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
To configure our vagrant virtual machine (VM) so that it uses dchp as private_network allowing us to give it our own ip, we will need to exit the VM with the exit command and halt our VM with vagrant halt.
exit
vagrant halt
Once you’ve exited the vagrant machine environment, the Ubuntu OS into our location machine folder where the vagrant is installed, a vagrantfile is located in this folder. It is in this vagrantfile that you add your configuration.
Add this line of code to your configuration.
config.vm.network "private_network", type: "dhcp"
This isn’t the end. We also need to make little configurations in the VirtualBox. This is assuming that you’ve installed VirtualBox and it’s working fine on your end.
Take the following steps to configure it
Select the installed virtual machine. Take note, vagrant automatically creates the VM in the VirtualBox during installation.
Select settings, choose network and then select Adapter 2 to add another network adapter. For the “Attached to” dropdown select “Host-only Adapter”. Then, for the “Name” dropdown select “vboxnet0”, then click OK.
To see what we just did, enter your VM with the vagrant ssh, then run the ifconfig command. You should notice some new changes. Like this:
vagrant@ubuntu-focal:~$ ifconfig
enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.2.15 netmask 255.255.255.0 broadcast 10.0.2.255
inet6 fe80::52:20ff:fe6d:cccd prefixlen 64 scopeid 0x20<link>
ether 02:52:20:6d:cc:cd txqueuelen 1000 (Ethernet)
RX packets 907 bytes 118268 (118.2 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 696 bytes 126192 (126.1 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp0s8: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.56.6 netmask 255.255.255.0 broadcast 192.168.56.255
inet6 fe80::a00:27ff:fec4:dd3d prefixlen 64 scopeid 0x20<link>
ether 08:00:27:c4:dd:3d txqueuelen 1000 (Ethernet)
RX packets 24 bytes 11082 (11.0 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 16 bytes 2342 (2.3 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 8 bytes 712 (712.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8 bytes 712 (712.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp0s8 shows your new ip address 192.168.56.6. Cool right?
The last to do is to transfer the output of ifconfig into a file, then transfer said file to our local machine - the host.
Run this command to write the output of ifconfig into the file that you’ll create.
ifconfig > ifconfig.txt
To send this file to your host machine securely, you need to install vagrant scp. For this installation, take your VM out of the folder where you have vagrant installed and run this command.
vagrant plugin install vagrant-scp
Once this is done, run this command to transfer the file from the VM to your host machine.
vagrant scp default:/home/vagrant/ifconfig.txt ~/Desktop
When you check your host desktop, you’ll see where the ifconfig.txt file is located.
If you are curious about what default I’m using, it’s the current name of the Virtual Machine.
Don’t believe me? Run this command in the vagrant folder.
vagrant status
Phew! This tutorial was a bit longer than I expected, but we were able to do what we set out to do.
If you have any questions or suggestions, please let me know it the comments.
Thank you so much for reading!
Also published here.