TLDR
Building your own ESP8266/ESP32 Over-The-Air Firmware Updater [A How-To Guide] Part I: Part I. This guide explains how to build a simple ESP866 firmware updater in NodeJS. It will send a GET request to my application with some key information stored in its header. This will then be used to serve up the appropriate binary. For this example I’m using an example Blink sketch from the Arduino library. We’ll need the compiled binary to upload to the sketch.via the TL;DR App
no story
Written by dazzatron | Co-founder at Shotstack.io. Previously Uber Marketplace.
