Hackernoon logoHow to Set Up a Kubernetes Cluster on Ubuntu 20.04/18.04/16.04 in 14 Steps by@jhooq

How to Set Up a Kubernetes Cluster on Ubuntu 20.04/18.04/16.04 in 14 Steps

Author profile picture

@jhooqRahul Wagh

https://jhooq.com/

In this article on “14 Steps to Install kubernetes on Ubuntu 18.04 and 16.04” we are going to create Kubernetes cluster along with kubeadm on Ubuntu 18.04 (The same steps can be used for the Ubuntu 16.04 as well)
kubeadm is command line tool to interact with kubernetes cluster. Kubeadm relies on fast deployment feature of Docker and running the system services of kubernetes master and etcd server as container.

We are going to use two nodes
  1. Master node
  2. Worker node
Prerequisites
  1. Reading time is about 20 minutes
  2. Vagrant 2.2.7 or latest – For installationi nstruction click here
  3. VM VirtualBox – For installation instruction click here
Step 1 – Start your vagrant box
As a minimum requirement for kubernetes installation we need –
  1. Master Node – 2 cpus, 2 GB Memory
  2. Worker Node – 1 cpu, 1 GB Memory
Use following Vagrantfile to spin up your vagrant box
Vagrant.configure("2") do |config|
  config.vm.define "master" do |master|
    master.vm.box_download_insecure = true    
    master.vm.box = "hashicorp/bionic64"
    master.vm.network "private_network", ip: "100.0.0.1"
    master.vm.hostname = "master"
    master.vm.provider "virtualbox" do |v|
      v.name = "master"
      v.memory = 2048
      v.cpus = 2
    end
  end

  config.vm.define "worker" do |worker|
    worker.vm.box_download_insecure = true 
    worker.vm.box = "hashicorp/bionic64"
    worker.vm.network "private_network", ip: "100.0.0.2"
    worker.vm.hostname = "worker"
    worker.vm.provider "virtualbox" do |v|
      v.name = "worker"
      v.memory = 1024
      v.cpus = 1
    end
  end

end
Step 2 – Update host files on both master and worker node
master node –
SSH into the master node
$ vagrant ssh master
Add host entry for master as well as worker node
vagrant@master:~$ sudo vi /etc/hosts

100.0.0.1 master.jhooq.com master
100.0.0.2 worker.jhooq.com worker
Test the worker node by sending from master
[vagrant@master ~]$ ping worker
PING worker.jhooq.com (100.0.0.2) 56(84) bytes of data.
64 bytes from worker.jhooq.com (100.0.0.2): icmp_seq=1 ttl=64 time=0.462 ms
64 bytes from worker.jhooq.com (100.0.0.2): icmp_seq=2 ttl=64 time=0.686 ms
Test the master node by sending from worker
[vagrant@worker ~]$ ping master
PING master.jhooq.com (100.0.0.1) 56(84) bytes of data.
64 bytes from master.jhooq.com (100.0.0.1): icmp_seq=1 ttl=64 time=0.238 ms
64 bytes from master.jhooq.com (100.0.0.1): icmp_seq=2 ttl=64 time=0.510 ms
Step 3 – Install Docker on both master and worker node
You need to install Docker on both the node.
So run the following installation command on both the nodes
[vagrant@master ~]$ sudo apt-get update

[vagrant@master ~]$ sudo apt install docker.io
Enable and start docker
vagrant@master:~$ sudo systemctl enable docker
Created symlink /etc/systemd/system/multi-user.target.wants/docker.service → /lib/systemd/system/docker.service.

[vagrant@master ~]$ sudo systemctl start  docker
Check the docker service status
[vagrant@master ~]$ sudo systemctl status docker

● docker.service - Docker Application Container Engine
   Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled)
   Active: active (running) since Thu 2020-04-23 19:10:59 UTC; 4s ago
     Docs: https://docs.docker.com
Step 4 – Disable the firewall and turnoff the “swapping”

We need to disable firewall as well as swapping on master as well as worker node. Because to install kubernetes we need to disable the swapping on both the nodes
vagrant@worker:~$ sudo ufw disable
Firewall stopped and disabled on system startup

[vagrant@worker ~]$ sudo swapoff -a
Step 5 – Install “apt-transport-https” package
To download the kubernetes and its public we need to install “apt-transport-https” package on both master as well as worker node
vagrant@master:~$ sudo apt-get update && sudo apt-get install -y apt-transport-https
Step 6 – Download the public keys
We need to have the public keys for accessing packages on Google Cloud.
So run the following command to get the public keys on both master as well as worker node
vagrant@worker:~$ curl -s https://packages.cloud.google.com/apt/doc/apt-key.gpg | sudo apt-key add -
OK
Step 7 – Add kubernetes repo
As a next step we need to add the kubernetes repo to both master as well as worker node
vagrant@worker:~$ sudo bash -c 'echo "deb http://apt.kubernetes.io/ kubernetes-xenial main" > /etc/apt/sources.list.d/kubernetes.list'
Step 8 – Install kubernetes
Now after adding the kubernetes repo we need to install the kubernetes on both mater as well as worker node
vagrant@master:~$ sudo apt-get update && sudo apt-get install -y kubelet kubeadm kubectl
Step 9 – Enable and Start kubelet
Alright now we have installed the kubernetes, now we need to enable the kubelet support for both master as well worker node
[vagrant@master ~]$ sudo systemctl enable kubelet

[vagrant@master ~]$ sudo systemctl start kubelet
Step 10 – Initialize the kubernetes cluster
Okay now we have reach to point where we have done all the prerequisite for initializing the kubernetes cluster.
Let’s run the kubernetes initialization command on only on master
[vagrant@master ~]$ sudo kubeadm init --apiserver-advertise-address=100.0.0.1 --pod-network-cidr=10.244.0.0/16
Note down kubeadm join command which we are going to use from worker node to join the master node using token.
sudo kubeadm join 100.0.0.1:6443 --token g2bsw7.5xr3bqc21eqyc6r7 --discovery-token-ca-cert-hash sha256:39b2b0608b9300b3342a8d0a0e9204c8fc74d45b008043a810f94e4f1fb8861f
Step 11 – Move kube config file to current user (only run on master)
To interact with the kubernetes cluster and to use kubectl command, we need to have the kube config file with us.

Use the following command to get the kube config file and put it under working directory.
[vagrant@master ~]$ mkdir -p $HOME/.kube
[vagrant@master ~]$ sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[vagrant@master ~]$ sudo chown $(id -u):$(id -g) $HOME/.kube/config
Step 12 – Apply CNI from kube-flannel.yml(only run on master)
After the master of the cluster is ready to handle jobs and the services are running, for the purpose of making containers accessible to each other through networking, we need to set up the network for container communication
Get the CNI(container network interface) configuration from flannel
[vagrant@master ~]$ wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
Note – But since we are working on the VMs so we need to check our Ethernet interfaces first.
Look out for the Ethernet i.e. eth1 which has a ip address 100.0.0.1(this is the ip address which we used in vagrant file)
[vagrant@master ~]$ ip a s
1: lo: <LOOPBACK,UP,LOWER_UP>
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 08:00:27:bb:14:75 brd ff:ff:ff:ff:ff:ff
    inet 10.0.2.15
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 08:00:27:fb:48:77 brd ff:ff:ff:ff:ff:ff
    inet 100.0.0.1
4: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP>
Now we need to add the extra args for eth1 in kube-flannel.yml
[vagrant@master ~]$ vi kube-flannel.yml
Searche for – “flanneld”
In the args section add : – –iface=eth1
- --iface=eth1
        args:
        - --ip-masq
        - --kube-subnet-mgr
        - --iface=eth1
Apply the flannel configuration
vagrant@master:~$ kubectl apply -f kube-flannel.yml
podsecuritypolicy.policy/psp.flannel.unprivileged created
clusterrole.rbac.authorization.k8s.io/flannel created
clusterrolebinding.rbac.authorization.k8s.io/flannel created
serviceaccount/flannel created
configmap/kube-flannel-cfg created
daemonset.apps/kube-flannel-ds-amd64 created
daemonset.apps/kube-flannel-ds-arm64 created
daemonset.apps/kube-flannel-ds-arm created
daemonset.apps/kube-flannel-ds-ppc64le created
daemonset.apps/kube-flannel-ds-s390x created
Step 13 – Join worker nodes to master(only run on worker)
In the Step 10 we generated the token and kubeadm join command.
Now we need to use that join command from our worker node
vagrant@worker:~$ sudo kubeadm join 100.0.0.1:6443 --token g2bsw7.5xr3bqc21eqyc6r7     --discovery-token-ca-cert-hash sha256:39b2b0608b9300b3342a8d0a0e9204c8fc74d45b008043a810f94e4f1fb8861f
W0423 19:27:00.344480   18268 join.go:346] [preflight] WARNING: JoinControlPane.controlPlane settings will be ignored when control-plane flag is not set.
[preflight] Running pre-flight checks
	[WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -oyaml'
[kubelet-start] Downloading configuration for the kubelet from the "kubelet-config-1.18" ConfigMap in the kube-system namespace
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Starting the kubelet
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...

This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.

Run 'kubectl get nodes' on the control-plane to see this node join the cluster.
Step 14 – Check the nodes status(only run on master)
To check the status of the nodes use
[vagrant@master ~]$ kubectl get nodes
NAME     STATUS   ROLES    AGE   VERSION
master   Ready    master   26m   v1.18.2
worker   Ready    <none>   63s   v1.18.2
Summary
So this was our beginner tutorial which involves around – 14 Steps to Install kubernetes on Ubuntu 18.04 and 16.04.
With that we can conclude what we have achieved –
  1. Congratulations we have successfully installed kubernetes on Ubuntu 18.04
  2. After installing kubernetes we are successfully join the worker nodes with master.

Tags

The Noonification banner

Subscribe to get your daily round-up of top tech stories!