Monit monitors Geth, autorestarts it on crashes and sends email alerts. Good, good Monit! I’m running geth and back-end on a low-cost Digital Ocean (DO) Ubuntu droplet. I use to autorestart geth and send email alerts when something goes wrong with the processes. TheMillionEtherHomepage.com monit Here I’ll cover a working solution and a beautiful one which isn’t working (hope somebody will eventually fix it). Install and setup monit $ sudo apt-get update $ sudo apt-get install monit Backup the config file and start editing it with nano: $ sudo cp /etc/monit/monitrc /etc/monit/monitrc-orig # backup $ sudo nano /etc/monit/monitrc Allow access to monit status. Uncomment these lines: set daemon 120 # number of seconds between checkups set httpd port 2812 and     use address localhost # only accept connection from localhost    allow localhost # allow localhost to connect to the server Let monit include *.cfg files from its conf.d directory. Uncomment (or add at the very end): include /etc/monit/conf.d/*.cfg Set up mail server to send alerts. Add these lines if you are using gmail: # GMAIL set mailserver smtp.gmail.com port 587     username "username@gmail.com" password "12345678"     using tlsv1     with timeout 30 seconds 

set alert username@gmail.com # monit will send alerts to this address Exit nano editor: Ctrl+X to save, type Y, press enter, and enter again when it asks for a filename (leave the same filename). Set up permossions as monitrc now has very sensitive data. $ sudo chmod 600 /etc/monit/monitrc For better understanding of monit: Video — Monitoring Linux Systems and Services with Monit Digital Ocean: How To Install and Configure Monit Setup geth monitoring — the working solution Create and start editing geth.cfg file with nano: $ sudo nano /etc/monit/monitrc/geth.cfg Paste this code: # GETH CHECK PROCESS geth MATCHING "[g]eth.*fast"     start program = "/bin/bash -c 'geth --fast --rpc --rpcport 8545 --rpccorsdomain localhost --cache=16 >/dev/null 2> /home/my-logs-folder/geth.log'" as uid username as gid username     stop program = "/bin/bash -c 'kill -HUP $(ps aux | grep '[g]eth' | awk '{print $2}')'" as uid username as gid username     if not exist then alert     if not exist then restart Ctrl+X to save, type Y, press enter, and hit enter again when it asks for a filename. We use >/dev/null here because geth outputs everything to the stderr (standard error output). And we save all stderr output (i.e. all logs) to the /home/my-logs-folder/geth.log file. We use -HUP signal because -SIGINT (which you typically send with Ctrl+C) will not reach geth here. Restart monit: $ sudo monit reload This config will perfectly send an email to you when geth crashes and will perfectly auto-restart geth But. The disadvantage here is that it cannot send “graceful” -SIGINT signal to geth through monit. And have to send -HUP instead, which is presumably not safe ( ). I tried it and it works, but I prefer to send -SIGINT manually instead: Is it safe to kill geth with SIGTERM? $ sudo monit unmonitor geth # so that monit won't restart geth again $ PID_OF_GETH=`pidof geth` # get geth's process ID $ kill -2 $PID_OF_GETH # KILL IT NOW!... but do it gracefully. This is clumsy. I’ve tried to make it more graceful but failed. Posted this question at stackexchange — How to monitor and auto-restart geth with monit? Setup geth monitoring — the right way I know that the config should look very similar to this. geth.cfg # GETH CHECK PROCESS geth with pidfile "/home/username/monit/geth.pid"     start program = "/bin/bash -c '/home/username/monit/geth.sh start'" as uid username as gid username     stop program = "/bin/bash -c '/home/username/monit/geth.sh stop'" as uid username as gid username     if not exist then alert     if not exist then restart geth.sh #!/bin/bash PID='/home/username/monit/geth.pid' LOGS='/home/username/monit/geth.log' KEYS='\--fast --rpc --rpcport 8545 --rpccorsdomain localhost --ipcpath /home/username/.ethereum/geth.ipc --cache=16' case $1 in     start)         setsid geth "$KEYS" &> "$LOGS" &         echo $! > "$PID"     ;;     stop)         kill -SIGINT `cat "$PID"`         rm "$PID"     ;;     *)     echo "usage: geth.sh {start|stop}"     ;; esac exit 0 Beautiful isn’t it? If you know how to make it work please submit your answer here — How to monitor and auto-restart geth with monit? Get monit status After you restart monit, you can start geth with the following command: $ sudo monit start geth This will run geth, autorestart it on crashes and notify you via email if something goes wrong. You can also check the monit status by the following command: $ sudo monit status And have a screen like this (mlneth here is python back-end of my ): project Monitoring geth Happy monitoting and no alerts to you all!

YouTube

Too Long; Didn't Read

In your car, at home, or at work — Bosch technology shapes many areas of life.

How to monitor geth and autorestart it on crashes with monit

Too Long; Didn't Read

Company Mentioned

Peter Porobov

About Author

TOPICS

THIS ARTICLE WAS FEATURED IN...

How to monitor geth and autorestart it on crashes with monit

Too Long; Didn't Read

Company Mentioned

Peter Porobov

About Author

TOPICS

THIS ARTICLE WAS FEATURED IN...

RELATED STORIES