How to Design an Effective Dashboard: The Essential Guideby@horovits
133 reads

How to Design an Effective Dashboard: The Essential Guide

by Dotan HorovitsFebruary 22nd, 2023
Read on Terminal Reader
Read this story w/o Javascript
tldt arrow

Too Long; Didn't Read

What does it take to design an effective dashboard? It starts with understanding your dashboard’s user persona and use case. Then utilizing the right data visualizations, creating clean layout with an intuitive flow, and keeping consistency of that layout. It's important also to support correlation between different dashboards, and to annotate thresholds and alerts. Read these and more on this detailed and practical guide.
featured image - How to Design an Effective Dashboard: The Essential Guide
Dotan Horovits HackerNoon profile picture

A Guide to Effective Dashboard Design for DevOps and SRE

The previous posts were about Phantom Metrics and Expensive Metrics. In this post, we’ll look at Unreadable Metrics and how to design effective dashboards.

Dashboards are powerful tools for monitoring and troubleshooting your system. Too often, however, we run into an incident and jump to the dashboard, just to find ourselves drowning in endless data and unable to find what we need.

This could be caused not just by the data overload, but also due to seeing too many or too few colors, inconsistent conventions, or the lack of visual cues.

We then need to waste precious time deciphering the dashboard rather than investigating the case at hand and end up frustrated.

Dashboards are a tricky thing. It’s not enough to just have all the data needed: the dashboard needs to be designed in a way that allows users easily access and interpret the data.

It requires more than the engineering mindset to do it right. Take these two guiding principles:

When designing a dashboard, think like a UX designer, and keep it simple.

In this guide, we’ll go over the basics of effective dashboard design and how to create a dashboard that will make it easy for you to troubleshoot an incident.

Understand Your Dashboard’s User Persona and Use Case

Start with understanding the persona of the user who will utilize the dashboard. After all, you’re not writing the dashboard to yourself (unless you do).

Adapt your dashboard to the familiarity and knowledge level of that persona.

If needed, add static text inside the dashboard to provide background on the metrics, their meaning, and upstream origin, as well as potential downstream dashboards, runbooks, or other actions to consider.

Equally important is to define the use case the dashboard aims to serve, and keep the dashboard design focused on the data and visualizations that serve this use case.

If the dashboard grows too big and broad, consider splitting it into several more targeted dashboards.

Taking an example from the Kubernetes domain, I may want to have a dashboard showing the pod status, and a separate dashboard showing the cluster status, and not mix the two.

This guiding principle of focus applies to the individual panels and visualizations. Each visualization should have a clear question it comes to answer.

You should be able to answer the defined question when looking at the visualization without doing much additional analysis in your head.

Remember that simplicity is key for dashboard design. Too many visualizations and data points can be overwhelming and make it difficult to find the information you’re looking for.

Keep your dashboard focused on your use case, and try to avoid adding unnecessary elements.

Utilize the Right Data Visualizations

The best dashboards use the right visualizations to convey the most important information.

For example, a graph might be a better choice than a table for displaying trends over time, while a pie chart might be a better choice than a line chart for comparing proportions between different groups.

Try to use the visualization that best conveys your data.

Sometimes a single number or a visual status indicator is more helpful than a ton of line graphs and data points.

For example, just showing the P99 (99th percentile) current latency as a single digit top-level figure over showing all 5 different percentiles over time. Remember: keep it simple.

Image caption: Single number count of nodes and pods. Below is the trend over time graph to elaborate. Source:

Another option is to overlay the real-time single figure clearly on top of the trend graph to get both into a single visualization:

Image caption: A line chart of latency over time, and the latest latency value overlayed. Source:

Create a Clean Layout With an Intuitive Flow

A clean and uncluttered layout is essential for effective dashboard design. Avoid overcrowding the dashboard with too much information and ensure that the design is easy to read and understand.

Organize the layout according to importance, from top to bottom and from left to right. That’s how our brain thinks and how we scroll through dashboards.

Place the most important and high-level information, such as summary and aggregated data or SLO (service level objectives), at the top, and then finer-detail visualizations downwards (and to the right).

If we look at the example of monitoring application performance, you may put the service's overall performance at the top, then drill down to the individual operations of that service below.

Image caption: Top view of service performance metrics, then drill down into individual operations. Source:

Don’t overuse the scrolling and drill down. Try and fit dashboards in one screen to save the scrolling down and remain focused.

This is especially important if this dashboard is meant to also be displayed on a central screen at the office.

No matter what, avoid horizontal scrolling. Fit the dashboard into the screen width, and if it doesn’t fit the page, result to vertical scrolling only.

Humans are wired to scroll down but can oftentimes miss parts that are to the sides. Remember, think UX.

Keep the Consistency of the Layout

Once you define a layout that works well, keep consistency with this layout, both within the same dashboard and across dashboards.

Seeing similar information presented in different ways in different places can be very confusing. We all know that green is good and red is bad, right?

You wouldn’t like to see blue signifying bad anywhere. Consistent color codes are one aspect, but it can also be a consistent graph type to visualize each data type, horizontal vs. vertical alignment, and so forth.

Consistency of the panel dimensions within the dashboard is also important. We often detect patterns by visually correlating the behavior of the wiggly line in different visualizations over time.

To ease this visual correlation, use the same panel width for graphs, and make sure the different panels automatically sync to show the same time window.

Here’s an example of the Grafana dashboard showing a Cassandra NoSQL database cluster.

The different graphs all have the same width and are all synchronized on the master time window of the dashboard (that is, in fact, the default behavior in Grafana OSS).

In this layout, it is easy to correlate a spike in read latency with the drop in cache hit rate over the same time, as the panels are visually aligned.

Image caption: Easy to see spike correlation using the same width and time frame. Source:

Correlate Between Different Dashboards and Views

Correlation doesn’t end with panels and visualizations within the same dashboard. You may find yourself needing to correlate a certain metric with metrics found on other dashboards or drill down into a specialized dashboard to carry on the investigation.

Or even correlate with other types of telemetry such as logs or traces. Take the time to incorporate the link to the referred dashboard to ease the transition with the existing investigative context.

Some tools have built-in support for such links, such as Dashboard and Panel data links in Grafana open source, or’s telemetry correlation, which carries the search context (the time frame, filters, etc.) over to the next dashboard.

If you can’t incorporate links natively, make notes on the dashboard as a static data panel with relevant guidelines, markdown, and links.

Annotate Thresholds, Alerts, and Events on the Graph

Does your metric have known limits, goals, or threshold values to be aware of? Visualize them as horizontal markers on the graph. Classic examples are maximum memory or disk capability or the error budget.

You can also annotate reference numbers such as last week’s average. Similarly, annotate thresholds of alerts that have been defined on that metric or panel.

In the following example, you can see the warning threshold annotated in yellow at 50% utilization and the error threshold annotated in red at 80% utilization:

Image caption: A line graph with a warning threshold (yellow) and an error threshold (red). Source:

Include the real-time alert status on the top line, so you can spot at first glance if the threshold is currently breached without having to inspect the graph. It can be as simple as a thumbs-down icon or a broken heart one.

If you can, annotate significant events that occur in the system’s lifecycle, such as configuration change, deployment of a new service version, or planned maintenance downtime as vertical marker lines on the graph.

This will help correlate changes in metric behavior with system changes that may have caused them, such as a buggy release or a misconfiguration.

In the below dashboard, we see a spike in the frontend latency (and a drop in new orders rate), and we can see a marker just before the spike, indicating a new version of the Payments service was deployed.

Image caption: Deployment marker on top of the graphs. Source:

Overlay Values on the Same Graph Only When Makes Sense

As engineers, we want to be efficient and overlay data on the same graph to ease correlation. But this oftentimes goes against the principle of simplicity and easy UX.

If you have 100 instances, plotting their CPU utilization on a single graph can be overwhelming.

Avoid plotting too many values on a single graph to make sure it’s manageable. One useful pattern here is to plot only the “10 highest” CPU consumers.

Even if the number of instances is not so high, but they behave very differently, and therefore have different scales, overlaying them over a single graph will make it quite unreadable. 

When a single instance is presented in a graph, the Y-axis range and scale are calibrated for that specific instance, but when multiple metrics share the same graph, the “noisy” metric will determine the overall graph scale, and we’ll find it difficult to see issues in some other metrics.

Similarly, consider carefully if it makes sense to overlay different metrics altogether. Plotting request rate, error rate, and latency on a single graph will probably make the graph quite difficult to use.

Three adjacent graphs for the same time window will probably work better. In some cases, however, it is useful such as overlaying your Kafka consumer lag and latency, which are naturally highly correlated:

Image caption: Kafka consumer lag and latency metrics plotted together with strong correlation. Source:

It’s important to note the scale of the graph even when plotting a single metric on it. With a single metric, some relatively minor jitters may visually look big and disturbing if we don’t pay attention to the scale.

Having threshold annotations overlaid, as we said above, can help put things in perspective.


It’s not enough that you have all the data needed, it needs to be accessible and usable so that people can actually understand what goes on and investigate issues.

When designing a dashboard, keep in mind the user experience. Make sure the data is presented in a way that allows users to quickly and easily understand what’s going on at a glance.

This means ensuring that the dashboard is free of data overload and that it uses consistent conventions and visual cues to make the data more accessible.

Remember: think like a UX designer, and keep it simple. These guidelines will help you create an effective dashboard that is both intuitive and actionable.

Liked it? Read also about:

Also published here