paint-brush
A very beautiful new alloyby@scientificamerican

A very beautiful new alloy

by Scientific American November 21st, 2023
Read on Terminal Reader
Read this story w/o Javascript
tldt arrow

Too Long; Didn't Read

A very beautiful new alloy, intended to replace brass in various ornamental uses, especially in window and door furniture, has been invented by W. A. Hopkins, of Paris. The alloy is composed of copper, tin, spelter, or zinc and lead, which metals are manipulated. A crucible is placed in the furnace and fired to red heat, and into the crucible thus heated the metals are placed in the proportions of—tin 1⅛ (say) 1 oz., spelter or zinc ½ oz., lead 5⁄16 of an ounce. These are the proportions he prefers to use, as he has found them to give excellent and satisfactory results, but he does not intend to confine himself rigidly to the precise proportions named, as they may, perhaps, be slightly varied in some particulars without materially detracting from the beautiful color of the alloy which it is intended to produce. The molten metals are kept well stirred, and any impurities therein should be removed. When thoroughly mixed, this alloy, which is termed the first alloy, is poured off into ingot moulds and left to cool. Copper, in the proportion of eight parts to one of this first alloy, is then placed in the crucible and brought to melting heat, when the tin or first alloy is added and intimately mixed with the copper, for which purpose the molten mass must be well stirred for several minutes; it is then poured into ingot moulds for sale in the form of ingots, or it may be poured into pattern moulds so as to produce the articles required. This is the mode of manipulation which it is preferred to employ, as an opportunity is thus afforded of removing any impurities from the first alloy before mixing it with the copper; but all the metals may, if preferred, be mixed together in the proportions given and melted at one operation. By this means an alloy is obtained of great strength, and of a very beautiful appearance, and which is particularly suitable for small work, such, for instance, as window and door furniture and other house furniture which is usually made in brass or other alloy of copper, though it is not intended to confine its use to such articles.
featured image - A very beautiful new alloy
Scientific American  HackerNoon profile picture

The alloy is composed of copper, tin, spelter, or zinc and lead, which metals are manipulated.

Scientific American, Vol. XXXVII.—No. 2. [New Series.], July 14, 1877 by Various, is part of the HackerNoon Books Series. You can jump to any chapter in this book here. New Alloy.

New Alloy.

A very beautiful new alloy, intended to replace brass in various ornamental uses, especially in window and door furniture, has been invented by W. A. Hopkins, of Paris. The alloy is composed of copper, tin, spelter, or zinc and lead, which metals are manipulated. A crucible is placed in the furnace and fired to red heat, and into the crucible thus heated the metals are placed in the proportions of—tin 1⅛ (say) 1 oz., spelter or zinc ½ oz., lead 5⁄16 of an ounce. These are the proportions he prefers to use, as he has found them to give excellent and satisfactory results, but he does not intend to confine himself rigidly to the precise proportions named, as they may, perhaps, be slightly varied in some particulars without materially detracting from the beautiful color of the alloy which it is intended to produce. The molten metals are kept well stirred, and any impurities therein should be removed. When thoroughly mixed, this alloy, which is termed the first alloy, is poured off into ingot moulds and left to cool. Copper, in the proportion of eight parts to one of this first alloy, is then placed in the crucible and brought to melting heat, when the tin or first alloy is added and intimately mixed with the copper, for which purpose the molten mass must be well stirred for several minutes; it is then poured into ingot moulds for sale in the form of ingots, or it may be poured into pattern moulds so as to produce the articles required. This is the mode of manipulation which it is preferred to employ, as an opportunity is thus afforded of removing any impurities from the first alloy before mixing it with the copper; but all the metals may, if preferred, be mixed together in the proportions given and melted at one operation. By this means an alloy is obtained of great strength, and of a very beautiful appearance, and which is particularly suitable for small work, such, for instance, as window and door furniture and other house furniture which is usually made in brass or other alloy of copper, though it is not intended to confine its use to such articles.




About HackerNoon Book Series: We bring you the most important technical, scientific, and insightful public domain books.


This book is part of the public domain. Various (2012). Scientific American, Vol. XXXVII. —No. 2. [New Series.], July 14, 1877. Urbana, Illinois: Project Gutenberg. Retrieved https://www.gutenberg.org/cache/epub/38481/pg38481-images.html


This eBook is for the use of anyone anywhere at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.org, located at https://www.gutenberg.org/policy/license.html.