Authors:
(1) Mehdi Naderi;
(2) Markos Papageorgiou;
(3) Dimitrios Troullinos;
(4) Iasson Karafyllis;
(5) Ioannis Papamichail. Table of Links Abstract and Introduction Vehicle Modeling The Nonlinear Feedback Control OD Corridors and Desired Orientations Boundary and Safety Controllers Simulation Results Conclusion Appendix A: Collision Detection Appendix B: Transformed ISO-Distance curves Appendix C: Local Density Appendix D: Safety Controller Details Appendix E: Controller Parameters References VII. CONCLUSION This paper proposes a comprehensive and efficient control scheme for vehicles moving on large lane-free roundabouts. The vehicle dynamics are represented by the bicycle model and its respective transformations for skewed and circular movements. Two nonlinear controllers are employed as the kernel of the vehicle movement strategies on the roundabout or the connected branches. Some modifications are introduced to facilitate entering and exiting maneuvers and to ensure performance in high-density situations. Also, a weighted average of optimal solutions of the shortest-path and minimum deviation problems is considered as the desired deviation to be fed to the circular controller. Furthermore, linear state feedback-based boundary and safety controllers are designed to avoid boundary violation or collisions in severe conditions. The simulation results, including microscopic and macroscopic data, confirm the effectiveness of the presented method in different conditions and show its flexibility in implementing various policies, like prioritizing entering vehicles. The suggested approach was designed so as to fulfill a number of significant requirements, such as collision avoidance, passenger convenience, boundary respect, guaranteed vehicle’s exit at their respective destinations, no roundabout blocking; while yielding a reasonably high throughput. Naturally there may be also other ways to control vehicles on lane-free roundabouts that meet these goals and possibly lead to higher throughput. Ongoing work is investigating such possibilities. This paper is available on arxiv under CC 4.0 license. Authors: (1) Mehdi Naderi; (2) Markos Papageorgiou; (3) Dimitrios Troullinos; (4) Iasson Karafyllis; (5) Ioannis Papamichail. Authors: Authors: (1) Mehdi Naderi; (2) Markos Papageorgiou; (3) Dimitrios Troullinos; (4) Iasson Karafyllis; (5) Ioannis Papamichail. Table of Links Abstract and Introduction Abstract and Introduction Vehicle Modeling Vehicle Modeling The Nonlinear Feedback Control The Nonlinear Feedback Control OD Corridors and Desired Orientations OD Corridors and Desired Orientations Boundary and Safety Controllers Boundary and Safety Controllers Simulation Results Simulation Results Conclusion Conclusion Appendix A: Collision Detection Appendix A: Collision Detection Appendix B: Transformed ISO-Distance curves Appendix B: Transformed ISO-Distance curves Appendix C: Local Density Appendix C: Local Density Appendix D: Safety Controller Details Appendix D: Safety Controller Details Appendix E: Controller Parameters Appendix E: Controller Parameters References References VII. CONCLUSION This paper proposes a comprehensive and efficient control scheme for vehicles moving on large lane-free roundabouts. The vehicle dynamics are represented by the bicycle model and its respective transformations for skewed and circular movements. Two nonlinear controllers are employed as the kernel of the vehicle movement strategies on the roundabout or the connected branches. Some modifications are introduced to facilitate entering and exiting maneuvers and to ensure performance in high-density situations. Also, a weighted average of optimal solutions of the shortest-path and minimum deviation problems is considered as the desired deviation to be fed to the circular controller. Furthermore, linear state feedback-based boundary and safety controllers are designed to avoid boundary violation or collisions in severe conditions. The simulation results, including microscopic and macroscopic data, confirm the effectiveness of the presented method in different conditions and show its flexibility in implementing various policies, like prioritizing entering vehicles. The suggested approach was designed so as to fulfill a number of significant requirements, such as collision avoidance, passenger convenience, boundary respect, guaranteed vehicle’s exit at their respective destinations, no roundabout blocking; while yielding a reasonably high throughput. Naturally there may be also other ways to control vehicles on lane-free roundabouts that meet these goals and possibly lead to higher throughput. Ongoing work is investigating such possibilities. This paper is available on arxiv under CC 4.0 license. This paper is available on arxiv under CC 4.0 license. available on arxiv

Part of HackerNoon's growing list of open-source research papers, promoting free access to academic material.

Polar Coordinates for Accurate Iso-Distance Curve Alignment in Vehicle Simulations

Controlling Automated Vehicles on Large Lane-free Roundabouts: Simulation Results

EScholar Technologies

Too Long; Didn't Read

Boost your HackerNoon story @ $159.99! 🚀

Evaluating Advanced Vehicle Control Schemes for Lane-Free Roundabouts

About Author

Comments

TOPICS

THIS ARTICLE WAS FEATURED IN

Related Stories

Untitled Story

5 Ways to Measure Privacy Risks in Text Data

From Knight Rider to Reality: Talking Cars are Here

Controlling Automated Vehicles on Large Lane-free Roundabouts

Collision Detection and Control in Automated Vehicle Simulations

Advanced Nonlinear Feedback Control Techniques for Automated Vehicles

5 Ways to Measure Privacy Risks in Text Data

From Knight Rider to Reality: Talking Cars are Here

Controlling Automated Vehicles on Large Lane-free Roundabouts

Collision Detection and Control in Automated Vehicle Simulations

Advanced Nonlinear Feedback Control Techniques for Automated Vehicles

Light-Mode

Classic

Newspaper

Dark-Mode

Neon Noir

Minty

HN StartUps