Table of Links Abstract and 1. Introduction Abstract and 1. Introduction 1.1 A Polyethylene-based metamaterial for acoustic control 1.1 A Polyethylene-based metamaterial for acoustic control 2 Relaxed micromorphic modelling of finite-size metamaterials 2 Relaxed micromorphic modelling of finite-size metamaterials 2.1 Tetragonal Symmetry / Shape of elastic tensors (in Voigt notation) 2.1 Tetragonal Symmetry / Shape of elastic tensors (in Voigt notation) 3 Dispersion curves 3 Dispersion curves 4 New considerations on the relaxed micromorphic parameters 4 New considerations on the relaxed micromorphic parameters 4.1 Consistency of the relaxed micromorphic model with respect to a change in the unit cell’s bulk material properties 4.1 Consistency of the relaxed micromorphic model with respect to a change in the unit cell’s bulk material properties 4.2 Consistency of the relaxed micromorphic model with respect to a change in the unit cell’s size 4.2 Consistency of the relaxed micromorphic model with respect to a change in the unit cell’s size 4.3 Relaxed micromorphic cut-offs 4.3 Relaxed micromorphic cut-offs 5 Fitting of the relaxed micromorphic parameters: the particular case of vanishing curvature (without Curl P and Curl P˙) 5 Fitting of the relaxed micromorphic parameters: the particular case of vanishing curvature (without Curl P and Curl P˙) 5.1 Asymptotes 5.1 Asymptotes 5.2 Fitting 5.2 Fitting 5.3 Discussion 5.3 Discussion 6 Fitting of the relaxed micromorphic parameters with curvature (with Curl P) 6 Fitting of the relaxed micromorphic parameters with curvature (with Curl P) 6.1 Asymptotes and 6.2 Fitting 6.1 Asymptotes and 6.2 Fitting 6.3 Discussion 6.3 Discussion 7 Fitting of the relaxed micromorphic parameters with enhanced kinetic energy (with Curl P˙) and 7.1 Asymptotes 7 Fitting of the relaxed micromorphic parameters with enhanced kinetic energy (with Curl P˙) and 7.1 Asymptotes 7.2 Fitting 7.2 Fitting 7.3 Discussion 7.3 Discussion 8 Summary of the obtained results 8 Summary of the obtained results 9 Conclusion and perspectives, Acknowledgements, and References 9 Conclusion and perspectives, Acknowledgements, and References A Most general 4th order tensor belonging to the tetragonal symmetry class A Most general 4th order tensor belonging to the tetragonal symmetry class B Coefficients for the dispersion curves without Curl P B Coefficients for the dispersion curves without Curl P C Coefficients for the dispersion curves with P C Coefficients for the dispersion curves with P D Coefficients for the dispersion curves with P D Coefficients for the dispersion curves with P 6 Fitting of the relaxed micromorphic parameters with curvature (with Curl P) 6.1 Asymptotes Because the cut-offs are independent of the coefficients with higher order of k, they do not change with the addition of Curl P. Instead, the expressions of the asymptotes hugely differ compared to the expression without Curl P discussed before. We only include the terms with the highest order of k available and compute Surprisingly, the asymptotes with Curl P are significantly simpler because we must only solve a second-order polynomial instead of a third-order polynomial needed for the cut-offs and the asymptotes without Curl P. We now only have four distinct horizontal asymptotes (two shear and two pressure) in contrast to six before, which means that we must allow that the two curves (one shear and one pressure) will tend to infinity for high values of k, and our choice falls on the two highest optic curves. The same reasoning about the use of the asymptote in Section 5.1 is applied here besides for the two highest optic curves that do not have a horizontal asymptote. 6.2 Fitting Although the expressions of the asymptotes are different from the ones without the Curl P, we still have the same split between the parameters, resulting in 4 independent parameters for every group of asymptotes, cf. Table 7. We list the numerical values of all parameters used for the fitting of the micromorphic model in Table 8. 6.3 Discussion Most other values remain at the same magnitude but are slightly higher, cf, Table 9. In future works, we will consider an enhanced relaxed micromorphic model to better describe these effects. This paper is available on arxiv under CC BY 4.0 DEED license. This paper is available on arxiv under CC BY 4.0 DEED license. available on arxiv Authors:
(1) Jendrik Voss, Institute for Structural Mechanics and Dynamics, Technical University Dortmund and a Corresponding Author (jendrik.voss@tu-dortmund.de);
(2) Gianluca Rizzi, Institute for Structural Mechanics and Dynamics, Technical University Dortmund;
(3) Patrizio Neff, Chair for Nonlinear Analysis and Modeling, Faculty of Mathematics, University of Duisburg-Essen;
(4) Angela Madeo, Institute for Structural Mechanics and Dynamics, Technical University Dortmund. Authors: Authors: (1) Jendrik Voss, Institute for Structural Mechanics and Dynamics, Technical University Dortmund and a Corresponding Author (jendrik.voss@tu-dortmund.de); (2) Gianluca Rizzi, Institute for Structural Mechanics and Dynamics, Technical University Dortmund; (3) Patrizio Neff, Chair for Nonlinear Analysis and Modeling, Faculty of Mathematics, University of Duisburg-Essen; (4) Angela Madeo, Institute for Structural Mechanics and Dynamics, Technical University Dortmund.

Part of HackerNoon's growing list of open-source research papers, promoting free access to academic material.

The Science Behind Stronger, Smarter Materials

Fine-Tuning Acoustic and Optical Waves in Metamaterials

Can You Reach the End of the Labyrinthine? 

Too Long; Didn't Read

Make resilience your competitive advantage

A New Method for Predicting How Waves Move Through Materials

About Author

Comments

TOPICS

THIS ARTICLE WAS FEATURED IN

Related Stories

Untitled Story

Can 3D Printing Improve Soundproofing? This Study Says Yes

How 3D-Printed Sound Panels Can Absorb Noise More Efficiently

Shhh! The Future of Noise Control Is Twisting Through 3D-Printed Labyrinths

Can 3D Printing Improve Soundproofing? This Study Says Yes

The Science of Soundproofing: A Look at 3D-Printed Acoustic Panels

Can 3D Printing Improve Soundproofing? This Study Says Yes

How 3D-Printed Sound Panels Can Absorb Noise More Efficiently

Shhh! The Future of Noise Control Is Twisting Through 3D-Printed Labyrinths

Can 3D Printing Improve Soundproofing? This Study Says Yes

The Science of Soundproofing: A Look at 3D-Printed Acoustic Panels

Light-Mode

Classic

Newspaper

Dark-Mode

Neon Noir

Minty

HN StartUps